[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Verifying Your Work
To verify the proper operation of logical systems,
the master administrator can use the following commands:
-
show bgp summary (logical-system logical-system-name)
-
show isis adjacency (logical-system logical-system-name)
-
show mpls lsp (logical-system logical-system-name)
-
show ospf neighbor (logical-system logical-system-name)
-
show route (logical-system logical-system-name)
-
show route protocol protocol (logical-system logical-system-name)
-
show rsvp session (logical-system logical-system-name )
-
logical-system (logical-system-name)
The following sections show the output of commands
used with the configuration example:
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
