Verifying Your Work

To verify the proper operation of your multiple-instance LDP configuration, use the following commands:

• show ldp database
• show ldp interface
• show ldp neighbor
• show ldp path
• show ldp route
• show ldp session
• show ldp statistics

The display output for these commands is the same as in previous JUNOS software releases, except for one difference. An instance name can now be used as an argument.

If you include an instance name with these commands, you display information for the specified LDP instance. For example, the command show ldp neighbor instance crockett shows all the LDP neighbors for a VRF instance named crockett. Conversely, show ldp neighbor without an instance name displays the LDP neighbors associated with the master instance.

The following sections show the output of these commands used with the configuration example:

• Router CE3 Status
• Router PE3 Status
• Router CE1 Status
• Router PE1 Status
• Router PE2 Status
• Router CE2 Status
• Router PE4 Status
• Router CE4 Status

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.