To verify proper operation of traffic engineered Layer 2 circuits, use the following command:
- show route table mpls.0 detail
On Router PE1, you can see that ATM traffic is part of the gold community that has a value of 103:1 and is associated with LSP 1. Likewise, Frame Relay traffic is part of the silver community that has a value of 103:2 and is associated with LSP 2:
user@PE1> show route table mpls.0 detail
mpls.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
at-1/1/0.32 (1 entry, 1 announced)
*L2CKT Preference: 7
Next hop: 192.168.27.9 via so-1/1/0.0 weight 1, selected
Label-switched-path lsp1
Label operation: Push 100032 Offset: -4
Next hop: via so-0/0/1.0 weight 1
Label-switched-path lsp2
Label operation: Push 100032 Offset: -4
Protocol next hop: 10.255.17.4
Push 100032 Offset: -4
Indirect next hop: 8576bd0 300
State: <Active Int>
Age: 7:18
Task: Common L2 VC
Announcement bits (2): 0-KRT 1-Common L2 VC
AS path: I
Communities: 103:1 # This is the gold community.
so-1/1/1.512 (1 entry, 1 announced)
*L2CKT Preference: 7
Next hop: 192.168.27.9 via so-1/1/0.0 weight 1
Label-switched-path lsp1
Label operation: Push 100048 Offset: -4
Next hop: via so-0/0/1.0 weight 1, selected
Label-switched-path lsp2
Label operation: Push 100048 Offset: -4
Protocol next hop: 10.255.17.4
Push 100048 Offset: -4
Indirect next hop: 860f1f8 293
State: <Active Int>
Age: 5:15
Task: Common L2 VC
Announcement bits (2): 0-KRT 1-Common L2 VC
AS path: I
Communities: 103:2 # This is the silver community.