[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Verifying Your Work
To verify proper operation of GMPLS, you can use
the following commands:
-
show link-management (te-link | peer)
-
show link-management routing (te-link | peer)
-
show mpls lsp (bidirectional | unidirectional)
-
show mpls lsp (detail | extensive)
-
show ospf interface
-
show ospf neighbor
-
show rsvp interface link-management
-
show rsvp session (bidirectional | unidirectional)
-
show rsvp session te-link
-
show rsvp session detail
-
show rsvp neighbor detail
-
show ted database extensive
-
traceroute (using the lsp flag with
RSVP protocol–level trace options)
The following sections show the output of these
commands used with the configuration example:
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
