[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
System Requirements
To implement IPSec, your system must meet these
minimum requirements:
- JUNOS Release 8.5 or later for automatic reenrollment
of digital certificates.
- JUNOS Release 8.3 or later for IPSec support on OSPF version
2
- JUNOS Release 8.2 or later for support on M120 routers
- JUNOS Release 8.1 or later for IPSec IKE support in routing
instances, and certificate revocation list support on J-Series Services
Routers and AS and MultiServices PICs installed on M-series and T-series
routing platforms
- JUNOS Release 7.6 or later for AES encryption and SHA-256
authentication support on J-series Services Routers and AS PICs installed
in M-series routers, and IPv6-based IPSec for AS PICs installed in
M-series and T-series routing platforms
- JUNOS Release 7.5 or later for digital certificate support
on J-series Services Routers and AS PICs installed in M-series and
T-series routing platforms, and support of the IPSec Monitoring Management
Information Base (MIB)
- JUNOS Release 7.4 or later for dynamic endpoint tunneling
support and configuring multiple routed tunnels in a single next-hop
service set
- JUNOS Release 7.2 or later for transport mode IPSec on
Routing Engines running OSPF version 3 and support for the AS II FIPS
PIC
- JUNOS Release 7.1 or later for IPSec on the ES PIC for
T-series and M320 routing platforms
- JUNOS Release 7.0 or later for IPSec on a J-series Services
Router
- JUNOS Release 6.4 or later for IPSec on the AS PIC for
T-series and M320 routing platforms
- JUNOS Release 6.2 or later for IPSec on the AS PIC for
M-series routers
- JUNOS Release 5.7 or later for multicast over IPSec tunnels
on M-series routers
- JUNOS Release 5.2 or later for IPSec on the ES PIC for
M-series routers
- Two Juniper Networks J-series, M-series, or T-series routing
platforms
- Two ES PICs or AS PICs for M-series and T-series routing
platforms
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
