[Contents] [Prev] [Next] [Index] [Report an Error]

Router 1

user@router1> show services
dynamic-flow-capture control-source capture-group g1 source-identifier
cs2 detail

Capture group: g1, Control source: cs2
Criteria added: 1, Criteria add failed: 0
Active criteria: 2 
Static criteria: 0, Dynamic criteria: 2
Control protocol requests: 3
						Add        Delete          List       Refresh         No-op
Requests           1             0             1             0             1
Failed             0             0             0             0             0

Add request rate: 0
Add request peak rate: 1
Bandwidth across all criteria: 0
Total notifications: 0
Restart: 0, Rollover: 0, No-op: 0, Timeout: 0, Congestion: 0, Congestion delete: 0,
Dups dropped: 0
Criteria deleted: 0
Timeout idle: 0, Timeout total: 0, Packets: 0, Bytes: 0
Sequence number: 242

To clear dynamic flow capture criteria belonging to a particular control source, issue the clear services dynamic-flow-capture command. For more information on other dynamic flow capture-related operational mode commands, see the JUNOS System Basics and Services Command Reference.

[Contents] [Prev] [Next] [Index] [Report an Error]