[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
For More Information
For additional information about Layer 2 circuits,
see the following:
-
JUNOS Network Interfaces Configuration
Guide
-
JUNOS Class of Service Configuration
Guide
-
JUNOS VPNs Configuration Guide
- RFC 3036, LDP Specification
- RFC 4447, Pseudowire Setup and Maintenance Using
the Label Distribution Protocol (LDP) (except section 5.3)
- RFC 4448, Encapsulation Methods for Transport
of Ethernet over MPLS Networks
- Internet draft draft-martini-atm-encap-mpls-01.txt, Encapsulation Methods for Transport
of ATM Cells/Frame Over IP and MPLS Networks (expires December
2002)
- Internet draft draft-martini-l2circuit-encap-mpls-11.txt, Encapsulation Methods for Transport
of Layer 2 Frames over MPLS Networks (expires August 2006)
- Internet draft draft-martini-l2circuit-trans-mpls-19.txt, Transport of Layer 2 Frames Over
MPLS (expires September 2006)
- Internet draft draft-kompella-ppvpn-l2vpn-03.txt, Layer 2 VPNs Over Tunnels (expires October 2003)
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]