[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Capture Group

A dynamic flow capture capture group defines a profile of dynamic flow capture configuration information. The static configuration includes information about control sources, content destinations, and notification destinations. Dynamic configuration is added through interaction with control sources using a control protocol.

To configure a capture group, include the capture-group statement at the [edit services dynamic-flow-capture] hierarchy level:



[edit services dynamic-flow-capture]
capture-group client-name {


content-destination identifier {
address address;
ttl hops;
}




control-source identifier {
allowed-destinations [ destination ];
no-syslog;
notification-targets [ address address port                    port-number ];
service-port port-number;
shared-key value;
source-addresses [ address ];
}


input-packet-rate-threshold rate;
interfaces interface-name;
pic-memory-threshold percentage percentage;
}

To specify the capture-group, assign it a unique client-name that associates the information with the requesting control sources.

[Contents] [Prev] [Next] [Index] [Report an Error]