[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Extended VLAN Encapsulation with Remote and Proxy ARP Addresses

Specify the encapsulation for extended VLAN circuits with the encapsulation extended-vlan-tcc statement. This statement configures the entire physical device.

You must also enable VLAN tagging. Ethernet interfaces in VLAN mode can have multiple logical interfaces. For encapsulation type extended-vlan-tcc, all VLAN IDs from 0 through 4094 are valid, up to a maximum of 1024 VLANs.

To enable ARP functionality, configure the remote statement at the [edit interfaces interface-name unit unit-number family tcc] hierarchy level with either the MAC address or IP address of your Ethernet TCC neighbor. To complete the ARP setup, configure the proxy statement at the [edit interfaces interface-name unit unit-number family tcc] hierarchy level and specify the IP address of the non-Ethernet TCC neighbor.



[edit]
interfaces {



EthernetType-fpc/pic/port {
vlan-tagging;
encapsulation extended-vlan-tcc;


unit 0 {
vlan-id 600;


family tcc {


remote { # Addresses associated with the Ethernet TCC neighbor.
mac-address mac-address;
# Select a MAC or IP address.
inet-address inet-address;
}




proxy { # Addresses belonging to the non-Ethernet TCC neighbor.
inet-address inet-address;
}


}


}


}


}

[Contents] [Prev] [Next] [Index] [Report an Error]