[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Ethernet Encapsulation with Remote and Proxy ARP Addresses

For Ethernet TCC circuits, specify the encapsulation with the encapsulation ethernet-tcc statement. This statement configures the entire physical device.

To provide Address Resolution Protocol (ARP) functionality for an Ethernet-based neighbor, configure the remote statement at the [edit interfaces interface-name unit unit-number family tcc] hierarchy level and specify either the MAC address or IP address of the TCC router’s Ethernet neighbor. To complete the setup of ARP, configure the proxy statement at the [edit interfaces interface-name unit unit-number family tcc] hierarchy level and specify the IP address of the TCC router’s non-Ethernet neighbor.



[edit]
interfaces 

EthernetType-fpc/pic/port {
encapsulation ethernet-tcc;


unit 0 {


family tcc {


remote { # Addresses associated with the Ethernet TCC neighbor.
mac-address mac-address;
# Select a MAC or IP address.
inet-address inet-address;
}




proxy { # Addresses belonging to the non-Ethernet TCC neighbor.
inet-address inet-address;
}


}


}


}

[Contents] [Prev] [Next] [Index] [Report an Error]