[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring an Interior Gateway Protocol

To implement MTR, you must configure a interior gateway protocol (IGP) to route local network traffic. MTR supports both OSPFv2 and static routes. Only static routes support IPv6 addresses since MTR does not support OSPFv3.

For more information about configuring an IGP for MTR, see the following sections:

Option: Configuring OSPF for Multitopology Routing
Option: Configuring Static Routes for Multitopology Routing

[Contents] [Prev] [Next] [Index] [Report an Error]