Configuring an Interface Encapsulation on CE-Facing Interfaces

When you configure Layer 2 circuits, you can use Ethernet, SONET/SDH, and ATM2 IQ interfaces on a PE router. The specific steps you must take to configure these interface types for Layer 2 circuits are described as follows:

• Configuring CCC Encapsulation on CE-Facing Ethernet Interfaces
• Configuring CCC Encapsulation on CE-Facing SONET/SDH Interfaces
• Configuring a CCC Encapsulation and a Layer 2 Circuit Mode on CE-Facing ATM2 IQ Interfaces

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.