[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Active Flow Monitoring
To implement active flow monitoring, your system
must meet these minimum requirements:
- JUNOS 9.3R2 or later for IPv6 support on flow monitoring
version 9.
- JUNOS 9.3R2 or later for multiple flows for flow monitoring
version 9.
- JUNOS Release 9.0 or later for version 9 flow aggregation
to multiple flow servers.
- JUNOS Release 8.5 or later for active flow monitoring
support on MultiServices 500 PICs.
- JUNOS Release 8.3 or later for flow monitoring version
9 support, MPLS support, and active flow monitoring support on MultiServices
100 and 400 PICs.
- JUNOS Release 8.2 or later for M120 router support and
for flow monitoring version 5 and 8 support on MultiServices 100 and
400 PICs.
- JUNOS Release 8.1 or later for the flow-tap services application
on Adaptive Services II PICs installed in M7i, M10i, M20, M40e, M320,
and T-series routing platforms
- JUNOS Release 7.4 or later for port mirroring of IPv6
packets
- JUNOS Release 7.3 or later for active flow monitoring
on Adaptive Services II PICs installed in TX Matrix platforms
- JUNOS Release 7.0 or later for active flow monitoring
on Adaptive Services II PICs installed in T-series and M320 routing
platforms
- JUNOS Release 7.0 or later for active flow monitoring
on J-series Services Routers
- JUNOS Release 6.0 or later for the Adaptive Services PIC
- JUNOS Release 5.7 or later for the automatic insertion
of AS numbers and SNMP index values for input and output interfaces
into records, port mirroring to multiple ports, and discard accounting
- JUNOS Release 5.6 or later for the Monitoring Services
PIC
- M5, M7i, M10, M10i, M20, M40e, M120, M160, M320, or T-series
routing platform with an Internet Processor II ASIC or later; or a
J-series Services Router
- Type 1 enhanced FPCs
- Two M-series or T-series PICs or J-series Physical Interface
Modules (PIMs) of your choice: One to receive incoming traffic and
one to forward outgoing traffic (the second PIC or PIM is not necessary
for discard accounting)
- Export PICs to connect to the collector or packet analyzer
- Tunnel Services PIC (required for multiple port mirroring
or mo- interface load balancing)
- Flow collector version 5, 8, or 9
- ES PIC and packet analyzers (optional)
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
