[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Single-Level Channels on a Channelized IQ Interface

You can subdivide a channelized interface directly into a set of large end channels. To configure part of a channelized IQ interface as a channel, include the partition statement at the [edit interfaces cxx-fpc/pic/port] hierarchy level. On a channelized OC12 IQ interface, use the oc-slice option to create slice sizes corresponding to the desired bandwidth. On a channelized E1 IQ interface, use the timeslots option to define NxDS0 channels or channel groups. On all channelized IQ interfaces, use the interface-type option to set the interface type (such as SONET OC3 or T3). Once the channel interfaces are established, you can configure them the same way as regular interfaces.

Note: One oc-slice in a channelized OC12 IQ interface partition is equivalent to one OC1/DS3-sized channel. If you add three slices together in sequence as a triplet, these pieces become an OC3-sized interface. However, you can configure triplets only with the following sequential slices: 1–3, 4–6, 7–9, 10–12.



[edit]
interfaces {


coc12-0/0/0 {
partition 1 oc-slice 1-3 interface-type so; # Creates an
OC3 SONET
}




so-0/0/0:1 {
encapsulation ppp;


unit 0 {


family inet {
address 10.255.0.2/30;
}


}


}


}

Configuring Single-Level Channels on a Channelized IQ Interface

Related Topics