Table 43 describes the Trap Destinations table command buttons.
Table 43: Trap Destinations Command Buttons and Field Descriptions
Command Button Name
Description
Privileges
Enabled/ Disabled
Results
Save Changes
Saves any changes made in the Trap Destinations table.
AIM Admin
Enabled when you add a new trap destination
Saves new changes.
Add New
Adds a new row in the Trap Destinations table.
AIM Admin
Always enabled
Adds a blank new row in Trap Destinations table.
Delete
Deletes the selected row(s) in the Trap Destinations table.
AIM Admin
Enabled when you select a trap destination row
Deletes selected trap destination row(s).
Table 44 describes the Trap Destinations table columns.
Table 44: Trap Destinations Table Columns
Name
Description
Privileges
Range/ Length
Default
Name
Unique name of trap destination.
AIM Admin
IP Address
IP Address of network management station where AIM trap destination will be sent.
AIM Admin
UDP Port
The User Data Protocol (UDP) port is a mechanism that allows a computer to simultaneously support multiple communication sessions with computers and programs on the network. A port directs the request to a particular service that can be found at that IP address.
AIM Admin
Port 162
Community String
A community string is a password that allows access to a network device. It defines what community of people can access the SNMP information that is on the device. The network operator responsible for the network device typically sets the community strings. The default strings 'public' and 'private' are usually assigned by default.