Archive Locations Table Description

Table 31 defines the Archive Locations table command columns.

Table 31: Archive Locations Table Command Button Descriptions

Button Name	Description	Privileges	Enabled/ Disabled	Results
Test Access	Tests access to the selected device archive local location pathname specified in the Local Location field.	AIM Admin	Enabled when you select an archive location in the Archive Location table.	The Test Access results are either: Successfully accessed location. Failure to access location.
Add New	Adds a new row in the Archive Location table	AIM Admin	Always enabled
Delete	Removes the selected archive location	AIM Admin	Enabled when you select an archive location row in the Archive Location table.

Table 32 defines the Archive Locations table fields.

Table 32: Archive Location Table Field Descriptions

Name	Description	Privileges	Range/ Length	Default
Local Location	The name of the local path where the Juniper device sends incident and intelligence JMBs. This path is relative to the installation machine.	AIM Admin	128 characters	Blank filed
Test Results	Displays results from the Test Access command for this row. The test results are either: Successfully accessed location. Failure to access location.	Not allowed to modify	N/A	Blank display field
Upload Command	Command that will be specified to set the archive location on the JUNOS devices. This command will be used to transfer the JMB files to the archive location.	AIM Admin	128 characters	Blank field
Password	Password that will be used by the JUNOS devices when they run the upload command to transfer the JMB files to the archive location.	AIM admin	64 characters	Blank field