Configuring AIM Organizations and Device Groups > Automatically Installing AI-Script Bundles

You can optionally use AIM to install AI-Script bundles (also known as AI-Script install packages) on devices as long as there is a JUNOScope software installation. AIM communicates with JUNOScope to install AI-Script bundles on JUNOS devices managed by JUNOScope. See Figure 13.

Figure 13: Automatic Installation of AI-Script Install Packages Using JUNOScope

To configure auto installation of AI-Script bundles to devices, follow these steps:

1. Configure the credentials used to communicate with JUNOScope, see Configuring JUNOScope Settings.
2. Import devices that are managed by JUNOScope, see Configuring JUNOScope Settings.
3. Configure Script Bundles, see Configuring Script Bundle Settings.
4. Associate imported devices with a device group, see Creating Device Groups.
5. Configure the Script Bundle of the device group and set the No-copy and Unlink installation attributes, see Creating Device Groups
6. Add archive locations specifying the upload command password attributes, see Configuring Archive Locations,
7. Press the Save Changes button, AIM sends a message to JUNOScope to install the selected script bundle on the associated devices.

If you do not want to use AIM to install AI-Script bundles, you can manually configure and install AI-Script bundles to each device separately. To install AI-Script bundles manually, see Manually Configuring and Installing AI-Scripts on Devices.