JUNOScope Settings Table Description

Table 13 describes the JUNOScope Settings command buttons.

Table 13: JUNOScope Settings Command Buttons

Button Name	Description	Privileges	Enabled/ Disabled	Results
Save Settings	First tests the connection to JUNOScope. If connection is successful, any modified parameters are saved.	AIM Admin Settings	Enabled if privilege	Displays the test results of the AIM connection to JUNOScope in the Test Results field: Successfully connected to JUNOScope server or An error message appears if settings are not saved.
Test Connection to JUNOScope	Uses the values in the JUNOScope settings fields to test the AIM connection to JUNOScope.	None	Always enabled	Displays test results of the AIM connection to JUNOScope in the Test Results field.

Table 14 describes the JUNOScope Settings table fields.

Table 14: JUNOScope Settings Table Parameter Descriptions

Name	Description	Privileges	Range/ Length	Default
JUNOScope URL	URL used to communicate with JUNOScope. Required for Script Bundle functionality	AIM Admin Settings	128 characters	Blank
JUNOScope Username	Log in ID to use for AIM communications with JUNOScope. This is the AIM user with read-write privileges created in the JUNOScope software. This setting is required for Script Bundle functionality	AIM Admin Settings	32 characters	Blank
JUNOScope Password	Password to use with the username	AIM Admin Settings	32 characters	Blank
Confirm JUNOScope Password	Password to type again for confirmation. The password must match the one in the password field	AIM Admin Settings	32 characters	Blank
IP Address for Device to JUNOScope FTP Connectivity	IP Address that the JUNOS devices use to transfer the Script Bundle from the JUNOScope server by way of FTP if DNS is not enabled on the device	AIM Admin Settings	32 characters	Blank
Test Results	Displays results from the Test Connection to JUNOScope command	Not allowed to modify	N/A	Blank