Step 7: Verify the LSP Again

Action

To verify the LSP again, enter the following command on the ingress, transit, and egress routers:

user@host> show mpls lsp extensive

Sample Output 1

user@R1> show mpls lsp extensive

Ingress LSP: 1 sessions

10.0.0.6

  From: 10.0.0.1, State: Up, ActiveRoute: 1, LSPname: R1-to-R6

  ActivePath:  (primary)

  LoadBalance: Random

  Encoding type: Packet, Switching type: Packet, GPID: IPv4

 *Primary                    State: Up

    Received RRO (ProtectionFlag 1=Available 2=InUse 4=B/W 8=Node 
10=SoftPreempt):

          10.1.13.2 10.1.36.2

    5 Oct 27 15:28:57 Selected as active path

    4 Oct 27 15:28:57 Record Route:  10.1.13.2 10.1.36.2

    3 Oct 27 15:28:57 Up

    2 Oct 27 15:28:44 10.1.13.2: No Route toward dest[35 times]

    1 Oct 27 15:05:56 Originate Call

  Created: Wed Oct 27 15:05:56 2004

Total 1 displayed, Up 1, Down 0

Egress LSP: 1 sessions

10.0.0.1

  From: 10.0.0.6, LSPstate: Up, ActiveRoute: 0

  LSPname: R6-to-R1, LSPpath: Primary

  Suggested label received: -, Suggested label sent: -

  Recovery label received: -, Recovery label sent: -

  Resv style: 1 FF, Label in: 3, Label out: -

  Time left:  136, Since: Wed Oct 27 15:29:20 2004

  Tspec: rate 0bps size 0bps peak Infbps m 20 M 1500

  Port number: sender 1 receiver 39092 protocol 0

  PATH rcvfrom: 10.1.13.2 (so-0/0/2.0) 6 pkts

  Adspec: received MTU 1500 

  PATH sentto: localclient

  RESV rcvfrom: localclient 

  Record route: 10.1.36.2 10.1.13.2 <self>  

Total 1 displayed, Up 1, Down 0

Transit LSP: 0 sessions

Total 0 displayed, Up 0, Down 0

Transit LSP: 0 sessions

Total 0 displayed, Up 0, Down 0

Sample Output 2

user@R3> show mpls lsp extensive

Ingress LSP: 0 sessions

Total 0 displayed, Up 0, Down 0

Egress LSP: 0 sessions

Total 0 displayed, Up 0, Down 0

Transit LSP: 2 sessions

10.0.0.1

  From: 10.0.0.6, LSPstate: Up, ActiveRoute: 1

  LSPname: R6-to-R1, LSPpath: Primary

  Suggested label received: -, Suggested label sent: -

  Recovery label received: -, Recovery label sent: 3

  Resv style: 1 FF, Label in: 100672, Label out: 3

  Time left:  152, Since: Wed Oct 27 15:16:39 2004

  Tspec: rate 0bps size 0bps peak Infbps m 20 M 1500

  Port number: sender 1 receiver 39092 protocol 0

  PATH rcvfrom: 10.1.36.2 (so-0/0/3.0) 7 pkts

  Adspec: received MTU 1500 sent MTU 1500

  PATH sentto: 10.1.13.1 (so-0/0/2.0) 7 pkts

  RESV rcvfrom: 10.1.13.1 (so-0/0/2.0) 7 pkts

  Explct route: 10.1.13.1 

  Record route: 10.1.36.2 <self> 10.1.13.1  

10.0.0.6

  From: 10.0.0.1, LSPstate: Up, ActiveRoute: 1

  LSPname: R1-to-R6, LSPpath: Primary

  Suggested label received: -, Suggested label sent: -

  Recovery label received: -, Recovery label sent: 3

  Resv style: 1 FF, Label in: 100656, Label out: 3

  Time left:  129, Since: Wed Oct 27 14:53:14 2004

  Tspec: rate 0bps size 0bps peak Infbps m 20 M 1500

  Port number: sender 1 receiver 47977 protocol 0

  PATH rcvfrom: 10.1.13.1 (so-0/0/2.0) 40 pkts

  Adspec: received MTU 1500 sent MTU 1500

  PATH sentto: 10.1.36.2 (so-0/0/3.0) 7 pkts

  RESV rcvfrom: 10.1.36.2 (so-0/0/3.0) 7 pkts

  Record route: 10.1.13.1 <self> 10.1.36.2  

Total 2 displayed, Up 2, Down 0

Sample Output 3

user@R6> show mpls lsp extensive

Ingress LSP: 1 sessions

10.0.0.1

  From: 10.0.0.6, State: Up, ActiveRoute: 1, LSPname: R6-to-R1

  ActivePath:  (primary)

  LoadBalance: Random

  Encoding type: Packet, Switching type: Packet, GPID: IPv4

 *Primary                    State: Up

    Computed ERO (S [L] denotes strict [loose] hops): (CSPF metric: 20)

 10.1.36.1 S 10.1.13.1 S 

    Received RRO (ProtectionFlag 1=Available 2=InUse 4=B/W 8=Node 
10=SoftPreempt):

          10.1.36.1 10.1.13.1

    6 Oct 27 15:22:06 Selected as active path

    5 Oct 27 15:22:06 Record Route:  10.1.36.1 10.1.13.1

    4 Oct 27 15:22:06 Up

    3 Oct 27 15:22:06 Originate Call

    2 Oct 27 15:22:06 CSPF: computation result accepted

    1 Oct 27 15:21:36 CSPF failed: no route toward 10.0.0.1[50 times]

  Created: Wed Oct 27 14:57:45 2004

Total 1 displayed, Up 1, Down 0

Egress LSP: 1 sessions

10.0.0.6

  From: 10.0.0.1, LSPstate: Up, ActiveRoute: 0

  LSPname: R1-to-R6, LSPpath: Primary

  Suggested label received: -, Suggested label sent: -

  Recovery label received: -, Recovery label sent: -

  Resv style: 1 FF, Label in: 3, Label out: -

  Time left:  119, Since: Wed Oct 27 15:21:43 2004

  Tspec: rate 0bps size 0bps peak Infbps m 20 M 1500

  Port number: sender 1 receiver 47977 protocol 0

  PATH rcvfrom: 10.1.36.1 (so-0/0/3.0) 7 pkts

  Adspec: received MTU 1500 

  PATH sentto: localclient

  RESV rcvfrom: localclient 

  Record route: 10.1.13.1 10.1.36.1 <self>  

Total 1 displayed, Up 1, Down 0

Transit LSP: 0 sessions

Total 0 displayed, Up 0, Down 0

What It Means

Sample Output 1 from ingress router R1 shows that LSP R1-to-R6 has an active route to R6 and the state is up.

Sample Output 2 from transit router R3 shows that there are two transit LSP sessions, one from R1 to R6 and the other from R6 to R1. Both LSPs are up.

Sample Output 3 from egress router R6 shows that the LSP is up and the active route is the primary route. The LSP is now traversing the network along the expected path, from R1 through R3 to R6, and the reverse LSP, from R6 through R3 to R1.