Checking the RSVP Layer

This chapter describes how to check the Resource Reservation Protocol (RSVP) layer of the layered Multiprotocol Label Switching (MPLS) model. (See Table 16.)

Table 16: Checklist for Checking the RSVP Layer

Checking the RSVP Layer Tasks	Command or Action
Checking the RSVP Layer
Verify the LSP	show mpls lsp extensive
Verify RSVP Sessions	show rsvp session
Verify RSVP Neighbors	show rsvp neighbor
Verify RSVP Interfaces	show rsvp interface
Verify the RSVP Protocol Configuration	show configuration protocols rsvp
Take Appropriate Action	The following sequence of commands addresses the specific problem described in this section: [edit] edit protocols rsvp [edit protocols rsvp] show set interface type-fpc/pic/port show commit
Verify the LSP Again	show mpls lsp extensive