Related Juniper Networks Documentation

Table 3 lists the books included in the Network Operations Guide series.

Table 3: JUNOS Internet Software Network Operations Guides

Book	Description
JUNOS Internet Software for M-series and T-series Routing Platforms Network Operations Guides
Baseline	Describes the most basic tasks for running a network using Juniper Networks products. Tasks include upgrading and reinstalling JUNOS software, gathering basic system management information, verifying your network topology, and searching log messages.
Interfaces	Describes tasks for monitoring interfaces. Tasks include using loopback testing and locating alarms.
MPLS	Describes tasks for configuring, monitoring, and troubleshooting an example MPLS network. Tasks include verifying the correct configuration of the MPLS and RSVP protocols, displaying the status and statistics of MPLS running on all routers in the network, and using the layered MPLS troubleshooting model to investigate problems with an MPLS network.
Hardware	Describes tasks for monitoring M-series and T-series routing platforms.

Table lists the software and hardware guides and release notes for Juniper Networks J-series, M-series, and T-series routing platforms and describes the contents of each document..

Table 4: Technical Documentation for J-series, M-series, and T-series Routing Platforms

Document	Description
JUNOS Internet Software for J-series, M-series, and T-series Routing Platforms Configuration Guides
Class of Service	Provides an overview of the class-of-service (CoS) functions of the JUNOS software and describes how to configure CoS features, including configuring multiple forwarding classes for transmitting packets, defining which packets are placed into each output queue, scheduling the transmission service level for each queue, and managing congestion through the random early detection (RED) algorithm.
CLI User Guide	Describes how to use the JUNOS command-line interface (CLI) to configure, monitor, and manage Juniper Networks routing platforms. This material was formerly covered in JUNOS System Basics Configuration Guide.
Feature Guide	Provides a detailed explanation and configuration examples for several of the most complex features in the JUNOS software.
JUNOS-FIPS	(M-series and T-series routing platforms only) Provides an overview of JUNOS-FIPS 140-2 concepts and describes how to install and configure the JUNOS-FIPS software. Describes FIPS-related commands and how to configure, authorize, and zeroize the Adaptive Services (AS) II FIPS Physical Interface Card (PIC).
MPLS Applications	Provides an overview of traffic engineering concepts and describes how to configure traffic engineering protocols.
Multicast Protocols	Provides an overview of multicast concepts and describes how to configure multicast routing protocols.
Network Interfaces	Provides an overview of the network interface functions of the JUNOS software and describes how to configure the network interfaces on the routing platform.
Network Management	Provides an overview of network management concepts and describes how to configure various network management features, such as SNMP and accounting options.
Policy Framework	Provides an overview of policy concepts and describes how to configure routing policy, firewall filters, forwarding options, and cflowd.
Routing Protocols	Provides an overview of routing concepts and describes how to configure routing, routing instances, and unicast routing protocols.
Services Interfaces	Provides an overview of the services interfaces functions of the JUNOS software and describes how to configure the services interfaces on the routing platform.
Software Installation and Upgrade Guide	Provides a description of JUNOS software components and packaging, and includes detailed information about how to initially configure, reinstall, and upgrade the JUNOS system software. This material was formerly covered in JUNOS System Basics Configuration Guide.
System Basics	Describes Juniper Networks routing platforms, and provides information about how to configure basic system parameters, supported protocols and software processes, authentication, and a variety of utilities for managing your router on the network.
VPNs	Provides an overview and describes how to configure Layer 2 and Layer 3 virtual private networks (VPNs), virtual private LAN service (VPLS), and Layer 2 circuits. Provides configuration examples.
JUNOS References
Hierarchy and RFC Reference	Describes the JUNOS configuration mode commands. Provides a hierarchy reference that displays each level of a configuration hierarchy, and includes all possible configuration statements that can be used at that level. This material was formerly covered in JUNOS System Basics Configuration Guide.
Interfaces Command Reference	Describes the JUNOS software operational mode commands you use to monitor and troubleshoot interfaces.
Routing Protocols and Policies Command Reference	Describes the JUNOS software operational mode commands you use to monitor and troubleshoot routing protocols and policies, including firewall filters.
System Basics and Services Command Reference	Describes the JUNOS software operational mode commands you use to monitor and troubleshoot system basics, including commands for real-time monitoring and route (or path) tracing, system software management, and chassis management. Also describes commands for monitoring and troubleshooting services such as CoS, IP Security (IPSec), stateful firewalls, flow collection, and flow monitoring.
System Log Messages Reference	Describes how to access and interpret system log messages generated by JUNOS software modules and provides a reference page for each message.
J-Web User Guide
J-Web Interface User Guide	Describes how to use the J-Web GUI to configure, monitor, and manage Juniper Networks routing platforms.
JUNOS API and Scripting Documentation
JUNOScript API Guide	Describes how to use the JUNOScript application programming interface (API) to monitor and configure Juniper Networks routing platforms.
JUNOS XML API Configuration Reference	Provides reference pages for the configuration tag elements in the JUNOS XML API.
JUNOS XML API Operational Reference	Provides reference pages for the operational tag elements in the JUNOS XML API.
JUNOS Configuration and Diagnostic Automation Guide	Provides an overview, instructions for using, and examples of the commit script and self-diagnosis features of the JUNOS software. This guide explains how to enforce custom configuration rules defined in scripts that run at commit time, how to use commit script macros to provide simplified aliases for frequently used configuration statements, and how to configure diagnostic event policies and actions associated with each policy.
NETCONF API Guide	Describes how to use the NETCONF API to monitor and configure Juniper Networks routing platforms.
JUNOS Comprehensive Index and Glossary
Comprehensive Index and Glossary	Provides a complete index of all JUNOS software books, the JUNOScript API Guide, and the NETCONF API Guide. Also provides a comprehensive glossary.
JUNOScope Documentation
JUNOScope Software User Guide	Describes the JUNOScope software GUI, how to install and administer the software, and how to use the software to manage routing platform configuration files and monitor routing platform operations.
J-series Services Router Documentation
J-series Services Router Getting Started Guide	Provides an overview, basic instructions, and specifications for J-series Services Routers. The guide explains how to prepare your site for installation, unpack and install the router and its components, install licenses, and establish basic connectivity.
J-series Services Router Basic LAN and WAN Access Configuration Guide	Explains how to configure the interfaces on J-series Services Routers for basic IP routing with standard routing protocols, ISDN backup, and digital subscriber line (DSL) connections.
J-series Services Router Advanced WAN Access Configuration Guide	Explains how to configure J-series Services Routers in virtual private networks (VPNs) and multicast networks, configure data link switching (DLSw) services, and apply routing techniques such as policies, stateless and stateful firewall filters, IP Security (IPSec) tunnels, and class-of-service (CoS) classification for safer, more efficient routing.
J-series Services Router Administration Guide	Shows how to manage users and operations, monitor network performance, upgrade software, and diagnose common problems on J-series Services Routers.
M-series and T-series Hardware Documentation
Hardware Guide	Describes how to install, maintain, and troubleshoot routing platforms and components. Each platform has its own hardware guide.
PIC Guide	Describes the routing platform PICs. Each platform has its own PIC guide.
Release Notes
JUNOS Release Notes	Summarize new features and known problems for a particular software release, provide corrections and updates to published JUNOS, JUNOScript, and NETCONF manuals, provide information that might have been omitted from the manuals, and describe upgrade and downgrade procedures.
Hardware Release Notes	Describe the available documentation for the routing platform and the supported PICs, and summarize known problems with the hardware and accompanying software. Each platform has its own release notes.
JUNOScope Software Release Notes	Contain corrections and updates to the published JUNOScope manual, provide information that might have been omitted from the manual, and describe upgrade and downgrade procedures.
J-series Services Router Release Notes	Briefly describe the J-series Services Router features, identify known hardware problems, and provide upgrade and downgrade instructions.

Document

Description

JUNOS Internet Software for J-series, M-series, and T-series Routing Platforms
Configuration Guides

Class of Service

Provides an overview of the class-of-service (CoS) functions of the JUNOS software and describes how to configure CoS features, including configuring multiple forwarding classes for transmitting packets, defining which packets are placed into each output queue, scheduling the transmission service level for each queue, and managing congestion through the random early detection (RED) algorithm.

CLI User Guide

Describes how to use the JUNOS command-line interface (CLI) to configure, monitor, and manage Juniper Networks routing platforms. This material was formerly covered in JUNOS System Basics Configuration Guide.

Feature Guide

Provides a detailed explanation and configuration examples for several of the most complex features in the JUNOS software.

JUNOS-FIPS

(M-series and T-series routing platforms only) Provides an overview of JUNOS-FIPS 140-2 concepts and describes how to install and configure the JUNOS-FIPS software. Describes FIPS-related commands and how to configure, authorize, and zeroize the Adaptive Services (AS) II FIPS Physical Interface Card (PIC).

MPLS Applications

Provides an overview of traffic engineering concepts and describes how to configure traffic engineering protocols.

Multicast Protocols

Provides an overview of multicast concepts and describes how to configure multicast routing protocols.

Network Interfaces

Provides an overview of the network interface functions of the JUNOS software and describes how to configure the network interfaces on the routing platform.

Network Management

Provides an overview of network management concepts and describes how to configure various network management features, such as SNMP and accounting options.

Policy Framework

Provides an overview of policy concepts and describes how to configure routing policy, firewall filters, forwarding options, and cflowd.

Routing Protocols

Provides an overview of routing concepts and describes how to configure routing, routing instances, and unicast routing protocols.

Services Interfaces

Provides an overview of the services interfaces functions of the JUNOS software and describes how to configure the services interfaces on the routing platform.

Software Installation and Upgrade Guide

Provides a description of JUNOS software components and packaging, and includes detailed information about how to initially configure, reinstall, and upgrade the JUNOS system software. This material was formerly covered in JUNOS System Basics Configuration Guide.

System Basics

Describes Juniper Networks routing platforms, and provides information about how to configure basic system parameters, supported protocols and software processes, authentication, and a variety of utilities for managing your router on the network.

VPNs

Provides an overview and describes how to configure Layer 2 and Layer 3 virtual private networks (VPNs), virtual private LAN service (VPLS), and Layer 2 circuits. Provides configuration examples.

JUNOS References

Hierarchy and RFC Reference

Describes the JUNOS configuration mode commands. Provides a hierarchy reference that displays each level of a configuration hierarchy, and includes all possible configuration statements that can be used at that level. This material was formerly covered in JUNOS System Basics Configuration Guide.

Interfaces Command Reference

Describes the JUNOS software operational mode commands you use to monitor and troubleshoot interfaces.

Routing Protocols and Policies Command Reference

Describes the JUNOS software operational mode commands you use to monitor and troubleshoot routing protocols and policies, including firewall filters.

System Basics and Services Command Reference

Describes the JUNOS software operational mode commands you use to monitor and troubleshoot system basics, including commands for real-time monitoring and route (or path) tracing, system software management, and chassis management. Also describes commands for monitoring and troubleshooting services such as CoS, IP Security (IPSec), stateful firewalls, flow collection, and flow monitoring.

System Log Messages Reference

Describes how to access and interpret system log messages generated by JUNOS software modules and provides a reference page for each message.

J-Web User Guide

J-Web Interface User Guide

Describes how to use the J-Web GUI to configure, monitor, and manage Juniper Networks routing platforms.

JUNOS API and Scripting Documentation

JUNOScript API Guide

Describes how to use the JUNOScript application programming interface (API) to monitor and configure Juniper Networks routing platforms.

JUNOS XML API Configuration Reference

Provides reference pages for the configuration tag elements in the JUNOS XML API.

JUNOS XML API Operational Reference

Provides reference pages for the operational tag elements in the JUNOS XML API.

JUNOS Configuration and Diagnostic Automation Guide

Provides an overview, instructions for using, and examples of the commit script and self-diagnosis features of the JUNOS software. This guide explains how to enforce custom configuration rules defined in scripts that run at commit time, how to use commit script macros to provide simplified aliases for frequently used configuration statements, and how to configure diagnostic event policies and actions associated with each policy.

NETCONF API Guide

Describes how to use the NETCONF API to monitor and configure Juniper Networks routing platforms.

JUNOS Comprehensive Index and Glossary

Comprehensive Index and Glossary

Provides a complete index of all JUNOS software books, the JUNOScript API Guide, and the NETCONF API Guide. Also provides a comprehensive glossary.

JUNOScope Documentation

JUNOScope Software User Guide

Describes the JUNOScope software GUI, how to install and administer the software, and how to use the software to manage routing platform configuration files and monitor routing platform operations.

J-series Services Router Documentation

J-series Services Router Getting Started Guide

Provides an overview, basic instructions, and specifications for J-series Services Routers. The guide explains how to prepare your site for installation, unpack and install the router and its components, install licenses, and establish basic connectivity.

J-series Services Router Basic LAN and WAN Access Configuration Guide

Explains how to configure the interfaces on J-series Services Routers for basic IP routing with standard routing protocols, ISDN backup, and digital subscriber line (DSL) connections.

J-series Services Router Advanced WAN Access Configuration Guide

Explains how to configure J-series Services Routers in virtual private networks (VPNs) and multicast networks, configure data link switching (DLSw) services, and apply routing techniques such as policies, stateless and stateful firewall filters, IP Security (IPSec) tunnels, and class-of-service (CoS) classification for safer, more efficient routing.

J-series Services Router Administration Guide

Shows how to manage users and operations, monitor network performance, upgrade software, and diagnose common problems on J-series Services Routers.

M-series and T-series Hardware Documentation

Hardware Guide

Describes how to install, maintain, and troubleshoot routing platforms and components. Each platform has its own hardware guide.

PIC Guide

Describes the routing platform PICs. Each platform has its own PIC guide.

Release Notes

JUNOS Release Notes

Summarize new features and known problems for a particular software release, provide corrections and updates to published JUNOS, JUNOScript, and NETCONF manuals, provide information that might have been omitted from the manuals, and describe upgrade and downgrade procedures.

Hardware Release Notes

Describe the available documentation for the routing platform and the supported PICs, and summarize known problems with the hardware and accompanying software. Each platform has its own release notes.

JUNOScope Software Release Notes

Contain corrections and updates to the published JUNOScope manual, provide information that might have been omitted from the manual, and describe upgrade and downgrade procedures.

J-series Services Router Release Notes

Briefly describe the J-series Services Router features, identify known hardware problems, and provide upgrade and downgrade instructions.