Step 7: Remove the Tracing Configuration
Purpose
It is considered best practice to remove any configuration elements that are no longer required, such as tracing configurations.
Action
To remove the tracing configuration, enter the following JUNOS CLI commands:
user@R5> edit
[edit protocols rsvp]
user@R5# show
user@R5# delete traceoptions
user@R5# show
user@R5# commit
Sample Output 1
user@R5> edit
Entering configuration mode
[edit]
user@R5# edit protocols rsvp
[edit protocols rsvp]
user@R5# show
traceoptions {
file rsvp-log;
flag error detail;
flag path detail;
flag pathtear detail;
}
interface so-0/0/3.0;
interface so-0/0/1.0;
interface so-0/0/2.0;
interface fxp0.0 {
disable;
}
[edit protocols rsvp]
user@R5# delete traceoptions
[edit protocols rsvp]
user@R5# show
interface so-0/0/3.0;
interface so-0/0/1.0;
interface so-0/0/2.0;
interface fxp0.0 {
disable;
}
[edit protocols rsvp]
user@R5# commit
commit complete
What It Means
The sample output from egress router R5 shows that tracing is deleted from the R5 configuration. In addition, the tracing configuration was removed from all routers (not shown).
 |
NOTE: Use the trace options |