Displaying Redundant SSB Configuration

You can configure which SSB is the master and which is the backup. By default, the SSB in slot 0 is the master and the SSB in slot 1 is the backup. You can modify the default configuration by including the ssb statement at the [edit chassis redundancy] hierarchy level.

NOTE: We recommend that both Routing Engines have the same configuration.

To display the current SFM redundancy configuration, follow these steps:

1. Enter the CLI configuration mode using the following command:

user@host# configure

2. Go to the [edit chassis redundancy] hierarchy level.
3. Show the SFM configuration using the following command:

user@host# show