Step 4: Display the Control Board Hardware Information

Action

To display the Control Board hardware information, use the following CLI command:

user@host> show chassis hardware

Sample Output

t640@host> show chassis hardware

Hardware inventory:

Item             Version  Part number  Serial number     Description

Chassis                                65565             M320

Midplane         REV 05   710-009120   RB0662            M320 Midplane

FPM GBUS         REV 04   710-005928   HV7564            M320 Board

FPM Display      REV 05   710-009351   HY0996            VFPD

CIP              REV 04   710-005926   HV2440            SCP

PEM 0            Rev 03   740-009148   QD17663           DC Power Entry Module

PEM 1            Rev 03   740-009148   QD17664           DC Power Entry Module

PEM 2            Rev 03   740-009148   QD17662           DC Power Entry Module

PEM 3            Rev 03   740-009148   QD16006           DC Power Entry Module

Routing Engine 0 REV 05   740-008883   P11123900322      RE-4.0

Routing Engine 1 REV 05   740-008883   P11123900311      RE-4.0

CB 0             REV 07   710-009115   HW8716            M320 Control Board

CB 1             REV 07   710-009115   HW8693            M320 Control Board

[...Output truncated...]

What It Means

The command output displays the Control Board slot number, revision level, part number, serial number, and description. The command output for this T640 routing node shows two Control Boards installed in slots CB0 and CB1.