[Contents] [Prev] [Next] [Index] [Report an Error]


Step 2: Display Detailed Interface Information

Purpose

Detailed interface information is useful when you need to further investigate the status of an interface after you have determined that there might be a problem.

Action

To display detailed information about the status of an interface, use the following JUNOS CLI operational mode command:

user@host> show interfaces interface-name extensive

Sample Output

The sample output is for an ATM interface. The fields vary depending on the type of interface.

user@host> show interfaces at-7/0/0 extensive
Physical interface: at-7/0/0, Enabled, Physical link is Up
  Interface index: 101, SNMP ifIndex: 106, Generation: 100
  Description: bangkok51 at-1/1/0
  Link-level type: ATM-PVC, MTU: 4482, Clocking: Internal, SONET mode, 
Speed: OC12, Loopback: None,
  Payload scrambler: Enabled
  Device flags   : Present Running
  Link flags     : None
  Hold-times     : Up 0 ms, Down 0 ms
  Current address: 00:90:69:10:c7:72
  Last flapped   : 2002-05-23 12:12:18 PDT (1d 03:20 ago)
  Statistics last cleared: Never
  Traffic statistics:
   Input  bytes  :              9526697                  744 bps
   Output bytes  :             10458384                  496 bps
   Input  packets:               129969                    0 pps
   Output packets:               126940                    0 pps
  Input errors:
    Errors: 0, Drops: 0, Invalid VCs: 0, Framing errors: 0, Policed 
discards: 0, L3 incompletes: 0,
    L2 channel errors: 0, L2 mismatch timeouts: 0
  Output errors:
    Carrier transitions: 0, Errors: 0, Drops: 0, Aged packets: 0
  SONET alarms   : None
  SONET defects  : None
  SONET PHY:            Seconds        Count  State
    PLL Lock                  0            0  OK
    PHY Light                 0            0  OK
  SONET section:
    BIP-B1                    1            9
    SEF                       0            0  OK
    LOS                       0            0  OK
    LOF                       0            0  OK
    ES-S                      1
    SES-S                     0
    SEFS-S                    0
  SONET line:
    BIP-B2                    1          183
    REI-L                     1          323
    RDI-L                     0            0  OK
    AIS-L                     0            0  OK
    BERR-SF                   0            0  OK
    BERR-SD                   0            0  OK
    ES-L                      1
    SES-L                     0
    UAS-L                     0
    ES-LFE                    1
    SES-LFE                   0
    UAS-LFE                   0
  SONET path:
    BIP-B3                    1           31
    REI-P                     1          216
    LOP-P                     0            0  OK
    AIS-P                     0            0  OK
    RDI-P                     0            0  OK
    UNEQ-P                    0            0  OK
    PLM-P                     0            0  OK
    ES-P                      1
    SES-P                     0
    UAS-P                     0
    ES-PFE                    1
    SES-PFE                   0
    UAS-PFE                   0
  Received SONET overhead:
    F1      : 0x00, J0      : 0x00, K1      : 0x00, K2      : 0x00
    S1      : 0x00, C2      : 0x13, C2(cmp) : 0x13, F2      : 0x00
    Z3      : 0x00, Z4      : 0x00, S1(cmp) : 0x00, V5      : 0x00
    V5(cmp) : 0x00
  Transmitted SONET overhead:
    F1      : 0x00, J0      : 0x01, K1      : 0x00, K2      : 0x00
    S1      : 0x00, C2      : 0x13, F2      : 0x00, Z3      : 0x00
    Z4      : 0x00, V5      : 0x00
  ATM status:
    HCS state:     Sync
    LOC      :       OK
  ATM Statistics:
    Uncorrectable HCS errors: 77, Correctable HCS errors: 5, Tx cell 
FIFO overruns: 0,
    Rx cell FIFO overruns: 1, Rx cell FIFO underruns: 0, Input cell 
count: 421980,
    Output cell count: 139110927341, Output idle cell count: 1671702365, 
Output VC queue drops: 0,
    Input no buffers: 0, Input length errors: 0, Input timeouts: 0, 
Input invalid VCs: 143301,
    Input bad CRCs: 0, Input OAM cell no buffers: 0
  Packet Forwarding Engine configuration:
    Destination slot: 7
    CoS transmit queue          Bandwidth          Buffer     Priority   
Limit
                              %          bps   %        bytes
    0 best-effort             0            0   0            0      
low    none
    1 expedited-forwarding    0            0   0            0      
low    none
    2 assured-forwarding      0            0   0            0      
low    none
    3 network-control         0            0   0            0      
low    none
Logical interface at-7/0/0.100 (Index 49) (SNMP ifIndex 143) (Generation 76)
    Flags: Point-To-Point Inverse-ARP SNMP-Traps Encapsulation: ATM-SNAP
    Traffic statistics:
     Input  bytes  :                 9993
     Output bytes  :                16246
     Input  packets:                  151
     Output packets:                  136
    Local statistics:
     Input  bytes  :                 9993
     Output bytes  :                16246
     Input  packets:                  151
     Output packets:                  136
    Transit statistics:
     Input  bytes  :                    0                    0 bps
     Output bytes  :                    0                    0 bps
     Input  packets:                    0                    0 pps
     Output packets:                    0                    0 pps
    Protocol inet, MTU: 4470, Flags: None, Generation: 200 Route table: 0
      Addresses, Flags: Is-Preferred Is-Primary
        Destination: 10.9.140.1, Local: 10.9.140.2, Broadcast: 
    Unspecified, Generation: 106
    Protocol iso, MTU: 4470, Flags: None, Generation: 201 Route table: 0
    Protocol mpls, MTU: 4458, Flags: None, Generation: 202 Route table: 0
    VCI 0.200
      Flags: Active, Inverse-ARP, OAM, Shaping
      VBR, Peak: 12mbps, Sustained: 10mbps, Burst size: 24, Queue length: 0
      OAM, Period 10 sec, Up count: 5, Down count: 4
      Total down time: 0 sec, Last down: Never
      ATM per-VC transmit statistics:
       Tail queue packet drops: 0
     OAM F5 cell statistics:
      Total received: 49, Total sent: 49
      Loopback received: 49, Loopback sent: 49
      Last received: 00:00:08, Last sent: 00:00:08
      RDI received: 0, RDI sent: 0
      AIS received: 0
      Traffic statistics:
       Input  bytes  :                 9993
       Output bytes  :                16246
       Input  packets:                  151
       Output packets:                  136

What It Means

The sample output shows static status information about this particular ATM interface. For examples of sample output for supported interfaces, see the JUNOS Network Interfaces Configuration Guide.

Table 29 lists the interface types supported by the JUNOS software and shows the interface name as it appears in the output.


Table 29: Interface Types Supported by the JUNOS Software
Interface Group
Interface Type
Format of interface-name

ATM

ATM

at-fpc/pic/port

Channelized

Channelized DS-3 to DS-0
Channelized DS-3 to DS-1
Channelized E1
Channelized OC-3 to T1
Channelized OC-12 to DS-3
Channelized STM-1 to E1

ds-fpc/pic/port:T1channel:DS-0 channel t1
t1-fpc/pic/port:channel t1
ds-fpc/pic/port:ds-0 channel e1

t3-fpc/pic/port:channel
e1-fpc/pic/port:channel

T1, T3, E1, E3

E1
E3
T1
T3

e1-fpc/pic/port
e3
-fpc/pic/port
t1
-fpc/pic/port
t3
-fpc/pic/port

Ethernet

Aggregated Ethernet
Fast Ethernet
Gigabit Ethernet
10-Gigabit Ethernet
Internal Ethernet
Management Ethernet

ae-fpc/pic/port
fe
-fpc/pic/port
ge
-fpc/pic/port
ge
-fpc/pic/port
fxp
fxp

Multilink

Frame Relay
PPP

ml-fpc/pic/port
ml
-fpc/pic/port

SONET/SDH

Aggregated SONET/SDH
SONET/SDH

as-fpc/pic/port
so
-fpc/pic/port

Other

Encryption
GRE tunnel
IP-IP tunnel
Loopback

es-fpc/pic/port:es
gr-fpc/pic/port
ip
-fpc/pic/port
lo



[Contents] [Prev] [Next] [Index] [Report an Error]