Display File Contents

Action

To display the contents of a file on the local router, use the following CLI operational mode command:

user@host> file show filename

Sample Output

user@host> file show /var/log/messages

Apr 13 21:00:08 romney /kernel: so-1/1/2: loopback suspected; going to standby.

Apr 13 21:00:40 romney /kernel: so-1/1/2: loopback suspected; going to standby.

Apr 13 21:02:48 romney last message repeated 4 times

Apr 13 21:07:04 romney last message repeated 8 times

Apr 13 21:07:13 romney /kernel: so-1/1/0: Clearing SONET alarm(s) RDI-P

Apr 13 21:07:29 romney /kernel: so-1/1/0: Asserting SONET alarm(s) RDI-P

Apr 13 21:07:36 romney /kernel: so-1/1/2: loopback suspected; going to standby.

Apr 13 21:08:08 romney /kernel: so-1/1/2: loopback suspected; going to standby.

...Output truncated...

What It Means

The sample output shows the contents of the /var/log/messages file.