[Contents][Prev][Next][Index][Report an Error]
Example: Configuring Flow Monitoring
The following is an example of flow-monitoring
properties configured to support input SONET/SDH interfaces, output
monitoring services interfaces, and export to cflowd for flow analysis.
To complete the configuration, you also need to configure the interfaces
and set up a virtual private network (VPN) routing and forwarding
(VRF) instance. For a complete example, see the JUNOS Feature Guide.
For information on cflowd, see Configuring Flow Aggregation.
- [edit forwarding-options]
- monitoring group1 {
-
- family inet {
-
- output {
-
cflowd 192.168.245.2 port 2055;
- export-format cflowd-version-5;
- flow-active-timeout 60;
- flow-inactive-timeout 30;
-
- interface mo-4/0/0.1 {
- engine-id 1;
- engine-type 1;
- input-interface-index 44;
- output-interface-index 54;
- source-address 192.168.245.1;
- }
-
- interface mo-4/1/0.1 {
- engine-id 2;
- engine-type 1;
- input-interface-index 45;
- output-interface-index 55;
- source-address 192.168.245.1;
- }
-
- interface mo-4/2/0.1 {
- engine-id 3;
- engine-type 1;
- input-interface-index 46;
- output-interface-index 56;
- source-address 192.168.245.1;
- }
-
- interface mo-4/3/0.1 {
- engine-id 4;
- engine-type 1;
- input-interface-index 47;
- output-interface-index 57;
- source-address 192.168.245.1;
- }
- }
- }
- }
[Contents][Prev][Next][Index][Report an Error]
