[Contents][Prev][Next][Index][Report an Error]

Configuring an NxT1 Bundle Using FRF.15

Configure an NxT1 bundle using FRF.15 on a link services IQ interface.

FRF.15 is similar to FRF.12, as described in Configuring a Single Fractional T1 Interface Using FRF.12. The difference is that FRF.15 supports multiple physical links in a bundle, whereas FRF.12 supports only one physical link per bundle. For the JUNOS software implementation of FRF.15, you can configure one DLCI per physical link.



[edit interfaces]
lsq-1/3/0 {
per-unit-scheduler;


unit 0 {
encapsulation multilink-frame-relay-end-to-end;
}


}
unit 1 {
encapsulation multilink-frame-relay-end-to-end;
}
# First physical link
t1-1/1/0:1 {
encapsulation frame-relay;


unit 0 {
dlci 69;


family mlfr-end-to-end {
bundle lsq-1/3/0.0;
}


}


}
# Second physical link
t1-1/1/0:2 {
encapsulation frame-relay;


unit 0 {
dlci 13;


family mlfr-end-to-end {
bundle lsq-1/3/0.0;
}


}


}

[Contents][Prev][Next][Index][Report an Error]