 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
This chapter describes messages with the SNMPD prefix. They are generated by the Simple Network Management Protocol (SNMP) agent process (snmpd), which responds to SNMP requests. As necessary, it passes the requests to subagent processes running on its machine and forwards the traps they generate to the SNMP manager.
function-name: message from source-address to destination-address (index1)
The indicated function failed because the authorization check failed for the interface, Simple Network Management Protocol (SNMP) community, or user making the request.
Error: An error occurred
notice
An internal software failure occurred.
Contact your technical support representative.
function-name: source-address: request exceeded community privileges
The indicated function failed because the Simple Network Management Protocol (SNMP) community making the access request did not have the required privileges.
Error: An error occurred
notice
An internal software failure occurred.
Contact your technical support representative.
function-name: request from address source-address not allowed
The indicated function failed because access requests from the indicated source address are not allowed.
Error: An error occurred
notice
An internal software failure occurred.
Contact your technical support representative.
function-name: source-address: unauthorized SNMP PDU type: pdu-type
The indicated function failed because the indicated type of protocol data unit (PDU) is not supported.
Error: An error occurred
notice
An internal software failure occurred.
Contact your technical support representative.
Source address for trap socket was set to bind-address
The source address for the indicated type of socket used by the Simple Network Management Protocol (SNMP) agent process (snmpd) was set to the indicated address.
Event: This message reports an event, not an error
info
An administrator changed the JUNOS configuration for the process or for an interface.
The online/offline state changed for a Physical Interface Card (PIC). This can also cause the address to become newly available or unavailable.
Configuration database has errors
The Simple Network Management Protocol (SNMP) agent process (snmpd) detected an error in the SNMP configuration database.
Error: An error occurred
error
function-name: error in operation context context-name
The indicated operation (addition or deletion) failed during configuration of the indicated Simple Network Management Protocol (SNMP) context.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: fopen filename: error-message
The Simple Network Management Protocol (SNMP) agent process (snmpd) could not access the indicated file.
Error: An error occurred
emergency
An internal software failure occurred.
Contact your technical support representative.
function-name: error in operation group: 'group-id' user 'username' model 'model'
The indicated operation (creation, installation, or deletion) failed during configuration of the indicated group.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
syslog-subtagdelimiterevent-name
A system parameter monitored by the self-monitoring feature crossed a rising or falling threshold.
Event: This message reports an event, not an error
error
System resources were being consumed.
snmpd initialization failure: error-message
Initialization of the Simple Network Management Protocol (SNMP) agent process (snmpd) failed.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: system_default_inaddr: error-message
The indicated function from the Juniper Networks Simple Network Management Protocol (SNMP) library failed and returned the indicated error to the SNMP agent process (snmpd).
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: radix_add failed: error-message
The Simple Network Management Protocol (SNMP) agent process (snmpd) uses radix trees to store valid client prefixes, which are used to determine authorization for requests from users and communities. It could not create a new entry in a radix tree.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: receive message failure: error-message
The indicated error occurred while the Simple Network Management Protocol (SNMP) agent process (snmpd) was receiving either a protocol data unit (PDU) from the User Datagram Protocol (UDP) or a message from a subagent.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: operation: operation filename: error-message
The indicated operation failed on the indicated remote monitoring (RMON) data file.
Error: An error occurred
critical
An internal software failure occurred.
Contact your technical support representative.
function-name: Null cookie
An invalid data pointer was returned when the remote monitoring (RMON) asynchronous completion handler performed an RMON alarm operation.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
syslog-subtagdelimitermessage
The indicated remote monitoring (RMON) event completed.
Event: This message reports an event, not an error
warning
function-name: internal Get request error: description, alarm alarm-id, error error-message, variable: name (oid)
A Get request for a monitored object instance failed during initialization of the indicated remote monitoring (RMON) alarm.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: sequence mismatch (expected-value, received-value), resyncing
A notification from the kernel to the Simple Network Management Protocol (SNMP) agent process (snmpd) was lost.
Event: This message reports an event, not an error
notice
function-name: send type (index1) failure: error-message
The Simple Network Management Protocol (SNMP) agent process (snmpd) could not send either a protocol data unit (PDU) to the User Datagram Protocol (UDP) or a message to a subagent.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
Snmp set failed: error-message
Configuration data was changed using an Simple Network Management Protocol (SNMP) Set request, but the SNMP agent process (snmpd) could not save the changes to the configuration database.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
Unable to generate OID from product-name (error-message)
The Simple Network Management Protocol (SNMP) agent process (snmpd) could not generate a value for the self-monitoring object identifier (OID) of the indicated product.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: socket failure: reason (error-message)
The Simple Network Management Protocol (SNMP) agent process (snmpd) uses sockets for communication with subagents. A socket operation, such as creation or removal, failed.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: socket failure: reason (error-message)
The Simple Network Management Protocol (SNMP) agent process (snmpd) uses sockets for communication with subagents. The process exited after a socket operation, such as creation or removal, failed.
Error: An error occurred
emergency
An internal software failure occurred.
Contact your technical support representative.
function-name: system function 'system-function-name' failed: error-message
The indicated function from the Simple Network Management Protocol (SNMP) system library failed and returned the indicated error to the SNMP agent process (snmpd).
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
Unable to determine sysObjectID from internal model: model
The Simple Network Management Protocol (SNMP) agent process (snmpd) could not determine the value of the sysObjectID object.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
Unable to generate OID for product product-name (error-message)
The Simple Network Management Protocol (SNMP) agent process (snmpd) could not generate a value for the sysObjectID object for the indicated product.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: cleared all throttled traps
The queue of throttled traps was cleared.
Event: This message reports an event, not an error
info
function-name: SNMP trap: cold start
The Simple Network Management Protocol (SNMP) agent process (snmpd) generated a cold-start trap when the entire Routing Engine (including the snmpd process) initialized.
Event: This message reports an event, not an error
critical
function-name: SNMP trap error: trap-message (error-message)
The Simple Network Management Protocol (SNMP) agent process (snmpd) could not generate a trap.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: SNMP trap error: invalid message (value) received
The Simple Network Management Protocol (SNMP) agent process (snmpd) received a trap message from a subagent that contained an invalid variable binding (varbind) type.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
Adding trap to trap-destination to queue-name queue, size traps in queue
A trap was queued for later transmission.
Event: This message reports an event, not an error
info
Possible causes include the following: (a) the system is not completely initialized, (b) a route does not exist, or (c) traps are being throttled.
function-name: traps queued to trap-destination sent successfully
The queued traps for the indicated destination were successfully sent.
Event: This message reports an event, not an error
info
function-name: after count attempts, deleting trap-count traps queued to trap-destination
The number of attempts to send traps to the indicated destination exceeded the configured maximum. The traps still waiting to be sent were discarded.
Error: An error occurred
error
Contact your technical support representative.
function-name: maximum queue size exceeded (size), discarding trap to trap-destination from queue-name queue
The number of traps in the trap queue exceeded the configured maximum. The traps still waiting to be sent were discarded.
Event: This message reports an event, not an error
info
function-name: traps throttled after count traps
The number of traps waiting for transmission exceeded the configured maximum, so the remaining traps were throttled.
Event: This message reports an event, not an error
info
function-name: SNMP trap: warm start
The Simple Network Management Protocol (SNMP) agent process (snmpd) generated a warm-start trap when it initialized (other Routing Engine processes were already active).
Event: This message reports an event, not an error
error
function-name: error in action user 'username' auth 'authentication-type' priv 'privilege-type'
The indicated operation (creation, installation, or deletion) failed during configuration of the indicated user.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |