SNMP System Log Messages

[Contents] [Prev] [Next] [Index] [Report an Error]

This chapter describes messages with the SNMP prefix. They are generated by two kinds of processes: .

Processes that perform Simple Network Management Protocol (SNMP) operations, such as the Management Information Base II (MIB II) process (mib2d) and the SNMP agent process (snmpd). Those processes also generate messages with prefixes that match their names, as described in “MIB2D System Log Messages” on page 373 and “SNMPD System Log Messages” on page 513.
Processes that are instrumented to generate system log messages when they send SNMP traps. The SNMP remote operations process (rmopd) is one such process. It also generates messages with the RMOPD_ prefix, which are described in “RMOPD System Log Messages” on page 419.

SNMP_GET_ERROR1

System Log Message

function-name operation failed for object-name: index1 index1 (error-message)

Description

An SNMP Get or GetNext request failed for the indicated object, which has the indicated index.

Type

Error: An error occurred

Severity

error

Cause

An internal software failure occurred.

Action

Contact your technical support representative.

SNMP_GET_ERROR2

System Log Message

function-name operation failed for object-name: index1 index1 index2 index2 (error-message)

Description

An SNMP Get or GetNext request failed for the indicated object, which has the indicated indexes.

Type

Error: An error occurred

Severity

error

Cause

An internal software failure occurred.

Action

Contact your technical support representative.

SNMP_GET_ERROR3

System Log Message

function-name operation failed for object-name: index1 index1 index2 index2 index3 index3 (error-message)

Description

An SNMP Get or GetNext request failed for the indicated object, which has the indicated indexes.

Type

Error: An error occurred

Severity

error

Cause

An internal software failure occurred.

Action

Contact your technical support representative.

SNMP_GET_ERROR4

System Log Message

function-name operation failed for object-name: index1 index1 index2 index2 index3 index3 index4 index4 (error-message)

Description

An SNMP Get or GetNext request failed for the indicated object, which has the indicated indexes.

Type

Error: An error occurred

Severity

error

Cause

An internal software failure occurred.

Action

Contact your technical support representative.

SNMP_RTSLIB_FAILURE

System Log Message

function-name: reason: error-message

Description

A call to the indicated function in the routing socket library failed with the indicated error.

Type

Error: An error occurred

Severity

emergency

Cause

An internal software failure occurred.

Action

Contact your technical support representative.

SNMP_TRAP_LINK_DOWN

System Log Message

ifIndex snmp-interface-index, ifAdminStatus admin-status, ifOperStatus operational-status, ifName interface-name

Description

The SNMP agent process (snmpd) generated a linkDown trap because the indicated interface changed state to 'down'.

Type

Event: This message reports an event, not an error

Severity

warning

SNMP_TRAP_LINK_UP

System Log Message

ifIndex snmp-interface-index, ifAdminStatus admin-status, ifOperStatus operational-status, ifName interface-name

Description

The SNMP agent process (snmpd) generated a linkUp trap because the indicated interface changed state to 'up'.

Type

Event: This message reports an event, not an error

Severity

info

SNMP_TRAP_TRACERT_PATH_CHANGE

System Log Message

traceRouteCtlOwnerIndex = test-owner, traceRouteCtlTestName = test-name

Description

The Simple Network Management Protocol (SNMP) remote operations process (rmopd) generated a traceRoutePathChange trap because two probes with the same time-to-live (TTL) value returned with different IP addresses.

Type

Event: This message reports an event, not an error

Severity

info

SNMP_TRAP_TRACERT_TEST_COMPLETED

System Log Message

traceRouteCtlOwnerIndex = test-owner, traceRouteCtlTestName = test-name

Description

The Simple Network Management Protocol (SNMP) remote operations process (rmopd) generated a tracerouteTestCompleted trap because the test completed and the full path to the target was determined.

Type

Event: This message reports an event, not an error

Severity

info

SNMP_TRAP_TRACERT_TEST_FAILED

System Log Message

traceRouteCtlOwnerIndex = test-owner, traceRouteCtlTestName = test-name

Description

The Simple Network Management Protocol (SNMP) remote operations process (rmopd) generated a tracerouteTestFailed trap because the test completed and the full path to the target was not determined.