 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
This chapter describes messages with the MIB2D prefix. They are generated by the Management Information Base II (MIB II) process (mib2d), which services requests for information gathered and reported by the Simple Network Management Protocol (SNMP).
function-name: error-message
The MIB II process (mib2d) could not process ATM-related information.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: configuration database has errors
The portion of the candidate configuration related to the MIB II process (mib2d) was checked for validity during a 'commit' operation. The check failed.
Error: An error occurred
error
The configuration was invalid.
Correct the invalid portion of the configuration as described in the error message on the console.
Unable to open file 'filename': error-message
The MIB II process (mib2d) could not open the indicated file.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
Ifd index assigned to interface-name changed from old-value to new-value, removing old interface
There was a change to the ifd Index assigned to the indicated existing interface.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
SNMP index assigned to interface-name changed from old-value to new-value
There was a change to the SNMP ifIndex assigned to the indicated existing interface.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
SNMP index assigned to interface-name.interface-unit changed from old-value to new-value
There was a change to the SNMP ifIndex assigned to the indicated existing interface.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: reason: error-message
A call to the indicated function in the kernel virtual memory library failed.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
Overload name: overload-name, interface: interface-name
The MIB II process (mib2d) generated a jnxPMonOverloadCleared trap when it detected the clearing of an overload condition on the indicated monitoring services interface.
Event: This message reports an event, not an error
warning
Overload name: overload-name, interface: interface-name
The MIB II process (mib2d) generated a jnxPMonOverloadSet trap when it detected an overload condition on the indicated monitoring services interface.
Event: This message reports an event, not an error
warning
function-name: failed in operation object-name: index (error-message)
A call to the indicated function in the routing socket library failed during the indicated operation on the indicated object.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: sequence mismatch (expected-value, received-value), resyncing
The indicated function in the routing socket library detected a sequence number mismatch. The MIB II process (mib2d) will resynchronize its data with the JUNOS kernel.
Event: This message reports an event, not an error
info
function-name: reason snmpid(snmp-interface-index) ifname(interface-name.interface-unit)
MIB2D can not assign snmp index for each interface.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: duplicate snmpid(snmp-interface-index) old ifname(interface-name.interface-unit) new ifname(new-interface-name.kernel-interface-unit)
The SNMP index for first interface name was assigned the same SNMP index as second interface name.
Error: An error occurred
emergency
An internal software failure occurred.
Contact your technical support representative.
function-name reason filename
MIB2D can not get the status of SNMP index file
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: reason filename
MIB2D can not write into a file containing all the indices
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: sysctl type failed: error-message
A request to the JUNOS kernel for system data failed.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
function-name: trap_request_header failed
The MIB II process (mib2d) could not allocate a trap header.
Error: An error occurred
error
The Routing Engine is low on memory.
Contact your technical support representative.
function-name: trap_request_send: error-message
The MIB II process (mib2d) could not send a trap header.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |