 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
This chapter describes messages with the FSAD prefix. They are generated by the File System Access process (fsad), which provides Trivial FTP (TFTP) support for file transfer between services Physical Interface Cards (PICs) and other routing platform components.
Reason: reason
The configuration file for the File System Access process (fsad) might contain an error.
Error: An error occurred
error
Connection timed out to the client (connection-type, ip-address) having request type port
The File System Access process (fsad) flushed all state information about the timed-out connection.
Event: This message reports an event, not an error
error
Failed to create directory directory-name: error-message
The File System Access process (fsad) could not create the indicated directory.
Error: An error occurred
error
function-name: stat() failed for pathname pathname: reason
The File System Access process (fsad) received a request for a nonexistent file or directory.
Error: An error occurred
error
The path does not exist.
Make sure the path specified in the request is valid.
In enclosing-function-name: function-name() returned: reason
An internal error occurred inside a function in the File System Access process (fsad).
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
enclosing-function-name: function-name failed for file 'filename' with error message reason
An internal error occurred while the File System Access process (fsad) was performing a file operation.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
Unable to remove file 'filename': reason
The File System Access process (fsad) could not remove the indicated file for the indicated reason.
Error: An error occurred
error
The file to be removed does not exist or its permissions do not allow the operation.
Make sure that the file exists and that its permissions allow it to be deleted.
Unable to rename file 'source-filename' to 'destination-filename': reason
The File System Access process (fsad) could not rename the indicated file for the indicated reason.
Error: An error occurred
error
Either the source file does not exist, or one or both of the source and destination pathnames are incorrect.
Make sure the source and destination paths exist and that the rename operation is allowed.
function-name: stat() failed for file pathname pathname: reason
The File System Access process (fsad) received a request for a nonexistent file.
Error: An error occurred
error
The file path does not exist.
Make sure the path specified in the request is valid.
Unable to sync file 'filename': reason
When closing a file, the File System Access process (fsad) executes the sync() system call to ensure that any changes to the file are committed to disk. This operation failed for the indicated file.
Error: An error occurred
error
Received flowc IPC message with incorrect length: message type message-type, subtype message-subtype, opcode operation-code, length length (expected length expected-value)
The File System Access process (fsad) received a flow collector IPC message in which the payload length was incorrect.
Error: An error occurred
error
Received flowc IPC message with incorrect subtype: message type message-type, subtype message-subtype, opcode operation-code, length length
The File System Access process (fsad) received a flow collector IPC message in which the subtype field was incorrect.
Error: An error occurred
error
Received flowc IPC message with incorrect type: message type message-type, subtype message-subtype, opcode operation-code, length length
The File System Access process (fsad) received a flow collector IPC message in which the type field was incorrect.
Error: An error occurred
error
Received flowc IPC message with incorrect version received-value (expected version expected-value)
The File System Access process (fsad) received a flow collector IPC message in which the version field was incorrect.
Error: An error occurred
error
reason
The File System Access process (fsad) received a request for the Flow Collector Transfer Log Archive service, which is not currently active.
Error: An error occurred
error
Unable to move temporary file temporary-filename (size file-size KB) to log file log-filename because free disk space (count KB) is insufficient
The File System Access process (fsad) could not move the CDR temporary file of the indicated size to the log file, because it is larger than the amount of free disk space.
Error: An error occurred
error
Unable to write CDR batch output to file temporary-filename because free disk space (count KB) is insufficient
The File System Access process (fsad) could not write CDR batch output to the indicated temporary file, because the amount of free disk space was insufficient.
Error: An error occurred
error
statfs() failed for pathname pathname: reason
The File System Access process (fsad) encountered an error in getting filesystem statistics.
Error: An error occurred
error
Received IPC message with incorrect length: message type message-type, subtype message-subtype, opcode operation-code, length length (expected length expected-value)
The File System Access process (fsad) received an IPC message in which the payload length was incorrect.
Error: An error occurred
error
Received IPC message with incorrect subtype: message type message-type, subtype message-subtype, opcode operation-code, length length
The File System Access process (fsad) received an IPC message in which the subtype field was incorrect.
Error: An error occurred
error
Received IPC message with incorrect type: message type message-type, subtype message-subtype, opcode operation-code, length length
The File System Access process (fsad) received an IPC message in which the type field was incorrect.
Error: An error occurred
error
Received generic IPC message with incorrect version received-value (expected version expected-value)
The File System Access process (fsad) received an IPC message in which the version field was incorrect.
Error: An error occurred
error
Received IPC message for inactive service service-name
The File System Access process (fsad) received an IPC message for a service that is currently not active.
Error: An error occurred
error
Failed to initialize service service-name
The File System Access process (fsad) could not initialize the indicated service.
Error: An error occurred
error
Upper limit reached in fsad for handling connections
The File System Access process (fsad) stopped accepting new connections because it reached an internal limit for handling connections.
Event: This message reports an event, not an error
error
allocation-function-name failed in the function function-name (line-number)
The File System Access process (fsad) could not allocate memory. The system might be running low on memory.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
Must be run as root
The user who attempted to start the File System Access process (fsad) was not the root user.
Error: An error occurred
error
directory-name: invalid directory: message
The parent directory specified in the request for a file was not valid.
Error: An error occurred
error
Make sure the path specified in the request is valid.
File path cannot be a directory (pathname)
The File System Access process (fsad) received a request on a directory instead of a regular file.
Error: An error occurred
error
The file path points to a directory.
Make sure the path points to a regular file.
invalid path 'pathname' : not a directory : action
The File System Access process (fsad) received a request for a pathname that was not a directory.
Error: An error occurred
error
Not a regular file (pathname)
The File System Access process (fsad) received a request for a pathname that points to a nonregular file.
Error: An error occurred
error
Make sure the path points to a regular file.
fsad received error message from client having request type connection-type at (ip-address, port)
The File System Access process (fsad) received a packet with the indicated error message from the other end of a connection.
Error: An error occurred
error
function-name: failed to rename temporary file filename to new-filename: reason
The File System Access process (fsad) could not rename the indicated temporary file for the indicated reason.
Error: An error occurred
error
Open file 'filename' closed due to process shutdown
The File System Access process (fsad) terminated a connection, stored the connection's (unwritten) data to disk, and purged it from its data structures.
Event: This message reports an event, not an error
notice
Open operation on trace file 'pathname' returned error error-message
The File System Access process (fsad) failed to open the indicated trace file.
Error: An error occurred
error
Incorrect usage, message
The File System Access process (fsad) displayed its usage statement.
Event: This message reports an event, not an error
error
The fsad process was invoked with incorrect command-line arguments.
Check the usage and invoke the fsad process with the correct command-line arguments.
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |