 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
This chapter describes messages with the DHCPD prefix. They are generated by the Dynamic Host Configuration Protocol (DHCP) server process (dhcpd) for J-series Services Routers, which automatically allocates network IP addresses and delivers configuration settings to client hosts in a Transmission Control Protocol (TCP)/IP network.
bind() to port port failed: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) received the indicated error when it tried to bind a socket to the indicated local port.
Error: An error occurred
error
Contact your technical support representative.
Running in degraded mode because of reason: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) began running in degraded mode because the indicated unrecoverable error occurred.
Error: An error occurred
error
There might be a problem with the lease cache directory used to store persistent lease information.
Contact your technical support representative.
Unable to allocate memory for object-name: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) could not allocate memory from the heap for the indicated object.
Error: An error occurred
error
Contact your technical support representative.
Unable to open overlay configuration: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) could not open an overlay configuration file for parsing.
Error: An error occurred
error
Contact your technical support representative.
Unable to parse overlay configuration because of count syntax errors
The Dynamic Host Configuration Protocol server process (dhcpd) could not parse its overlay configuration because the configuration contained the indicated number of syntax errors.
Error: An error occurred
error
An internal software failure occurred.
Contact your technical support representative.
Exiting due to too many recvmsg() failures
The Dynamic Host Configuration Protocol server process (dhcpd) could not receive data from the network, which it needs to do during normal operation.
Error: An error occurred
error
Contact your technical support representative.
Error with rtsock: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) experienced the indicated error with a routing socket.
Error: An error occurred
info
An internal software failure occurred.
Contact your technical support representative.
sendmsg() from source-address to port destination-port at destination-address via interface interface-name and routing instance routing-instance failed: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) could not send data from the indicated source (address, interface, and routing instance) to the indicated destination (port and address), which it needs to do during normal operation.
Error: An error occurred
error
Contact your technical support representative.
sendmsg() from source-address to port destination-port at destination-address via routing instance routing-instance failed: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) could not send data from the indicated source (address and routing instance) to the indicated destination (port and address), which it needs to do during normal operation.
Error: An error occurred
error
Contact your technical support representative.
setsockopt(socket-option) failed: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) could not set the indicated socket option.
Error: An error occurred
error
Contact your technical support representative.
socket(arguments) failed: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) could not create a socket.
Error: An error occurred
error
Contact your technical support representative.
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |