[Contents] [Prev] [Next] [Index] [Report an Error]

[edit interfaces] Hierarchy Level

The following statement hierarchy can also be included at the [edit logical-systems logical-system-name] hierarchy level.

interfaces {
interface-name {
disable;
accounting-profile name;
aggregated-ether-options {
(flow-control | no-flow-control);
lacp mode {
periodic interval;
}
link-protection;
link-speed speed;
(loopback | no-loopback);
minimum-links number;
source-address-filter {
mac-address;
}
(source-filtering | no-source-filtering);
}
aggregated-sonet-options {
link-speed (speed | mixed);
minimum-links number;
}
atm-options {
cell-bundle-size cells;
ilmi;
linear-red-profiles profile-name {
high-plp-max-threshold percent;
low-plp-max-threshold percent;
queue-depth cells high-plp-threshold percent low-plp-threshold percent;
}
mpls {
pop-all-labels {
required-depth number;
}
}
pic-type (atm1 | atm2);
plp-to-clp;
promiscuous-mode {
vpi vpi-identifier;
}
scheduler-maps map-name {
forwarding-class class-name {
epd-threshold cells plp1 cells;
linear-red-profile profile-name;
priority (high | low);
transmit-weight (cells number | percent number);
}
vc-cos-mode (alternate | strict);
}
vpi vpi-identifier {
maximum-vcs maximum-vcs;
oam-liveness {
down-count cells;
up-count cells;
}
oam-period (disable | seconds);
shaping {
(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);
queue-length number;
}
}
}
clocking clock-source;
data-input (system | interface interface-name);
dce;
description text;
dialer-options {
pool pool-name priority priority;
}
dsl-options {
operating-mode mode;
}
ds0-options {
bert-algorithm algorithm;
bert-error-rate rate;
bert-period seconds;
byte-encoding (nx56 | nx64);
fcs (16 | 32);
idle-cycle-flag (flags | ones);
invert data;
loopback (payload | remote);
start-end-flag (filler | shared);
}
e1-options {
bert-algorithm algorithm;
bert-error-rate rate;
bert-period seconds;
fcs (16 | 32);
framing (g704 | g704-no-crc4 | unframed);
idle-cycle-flag (flags | ones);
invert-data;
loopback (local | remote);
start-end-flag (filler | shared);
timeslots time-slot-range;
}
e3-options {
atm-encapsulation (direct | plcp);
bert-algorithm algorithm;
bert-error-rate rate;
bert-period seconds;
buildout feet;
compatibility-mode (digital-link | kentrox | larscom) <subrate value>;
fcs (16 | 32);
framing (g.751 | g.832);
idle-cycle-flag value;
invert-data;
loopback (local | remote);
(payload-scrambler | no-payload-scrambler);
start-end-flag (filler | shared);
(unframed | no-unframed);
}
encapsulation type;
ether-vpls-over-atm-llc;
es-options {
backup-interface es-fpc/pic/port;
}
fabric-options {
member-interfaces interface-name;
}
fastether-options {
802.3ad aex <backup | primary>;
(flow-control | no-flow-control);
ignore-l3-incompletes;
ingress-rate-limit rate;
(loopback | no-loopback);
mpls {
pop-all-labels {
required-depth number;
}
}
redundant-parent interface-name;
source-address-filter {
mac-address;
}
(source-filtering | no-source-filtering);
}
flexible-vlan-tagging;
framing (lan-phy | sdh | sonet | wan-phy);
gigether-options {
802.3ad aex;
(asynchronous-notification | no-asynchronous-notification);
(auto-negotiation <remote-fault (local-interface-online | local-interface-offline)> | no-auto-negotiation);
auto-reconnect seconds;
ethernet-switch-profile {
... ethernet-switch-profile-configuration ...
}
(flow-control | no-flow-control);
ignore-l3-incompletes;
(loopback | no-loopback);
mpls {
pop-all-labels {
required-depth number;
}
}
redundant-parent interface-name;
source-address-filter {
mac-address;
}
(source-filtering | no-source-filtering);
ethernet-switch-profile {
ethernet-policer-profile {
input-priority-map {
ieee802.1p premium [ values ];
}
output-priority-map {
classifier {
premium {
forwarding-class class-name {
loss-priority (high | low);
}
}
}
}
policer cos-policer-name {
aggregate {
bandwidth-limit bps;
burst-size-limit bytes;
}
premium {
bandwidth-limit bps;
burst-size-limit bytes;
}
}
}
(mac-learn-enable | no-mac-learn-enable);
tag-protocol-id [ tpids ];
}
}
(gratuitous-arp-reply | no-gratuitous-arp-reply);
hold-time up milliseconds down milliseconds;
isdn-options {
bchannel-allocation (ascending | descending);
calling-number number;
incoming-called-number number <reject>;
spid1 spid-string;
spid2 spid-string;
static-tei-val value;
switch-type (att5e | etsi | ni1 | ni2 | ntdms100 | ntt);
t310 seconds;
tei-option (first-call | power-up);
}
keepalives <down-count number> <interval seconds> <up-count number>;
link-mode mode;
lmi {
lmi-type (ansi | itu);
n391dte number;
n392dce number;
n392dte number;
n393dce number;
n393dte number;
t391dte seconds;
t392dce seconds;
}
lsq-failure-options {
no-termination-request;
trigger-link-failure interface-name;
}
mac mac-address;
mlfr-uni-nni-bundle-options {
acknowledge-retries number;
acknowledge-timer milliseconds;
action-red-differential-delay (disable-tx | remove-link);
cisco-interoperability send-lip-remove-link-for-link-reject;
drop-timeout milliseconds;
fragment-threshold bytes;
hello-timer milliseconds;
link-layer-overhead percent;
lmi-type (ansi | itu);
minimum-links number;
mrru bytes;
n391 number;
n392 number;
n393 number;
red-differential-delay milliseconds;
t391 seconds;
t392 seconds;
yellow-differential-delay milliseconds;
}
modem-options {
dialin (console | routable);
init-command-string initialization-command-string;
}
mtu bytes;
multiservice-options {
(core-dump | no-core-dump);
(syslog | no-syslog);
}
native-vlan-id number;
no-gratuitous-arp-request;
no-keepalives;
no-partition {
interface-type type;
}
optics-options {
wavelength nm;
}
partition partition-number interface-type type oc-slice oc-slice-range timeslots time-slot-range;
passive-monitor-mode;
per-unit-scheduler;
ppp-options {
chap {
access-profile profile-name;
default-chap-secret secret;
local-name name;
passive;
}
compression {
acfc;
pfc;
}
lcp-restart-timer milliseconds;
loopback-clear-timer seconds;
ncp-restart-timer milliseconds;
no-termination-request;
pap {
access-profile profile-name;
local-name name;
local-password password;
passive;
}
}
receive-bucket {
overflow (discard | tag);
rate percentage;
threshold bytes;
}
redundancy-options {
(hot-standby | warm-standby);
primary (lsq-fpc/pic/port | sp-fpc/pic/port);
secondary (lsq-fpc/pic/port | sp-fpc/pic/port);
}
redundant-ether-options {
(flow-control | no-flow-control);
link-speed (10m | 100m | 1g);
(loopback | no-loopback);
redundancy-group group-name;
source-address-filter mac-address;
(source-filtering | no-source-filtering);
}
schedulers number;
serial-options {
clock-rate rate;
clocking-mode (dce | internal | loop);
control-polarity (positive | negative);
cts-polarity (positive | negative);
dcd-polarity (positive | negative);
dce-options {
... dce-options-configuration...
}
dsr-polarity (positive | negative);
dte-options {
... dte-options-configuration...
}
dtr-circuit (balanced | unbalanced);
dtr-polarity (positive | negative);
encoding (nrz | nrzi);
indication-polarity (positive | negative);
line-protocol protocol;
loopback mode;
rts-polarity (positive | negative);
tm-polarity (positive | negative);
transmit-clock invert;
dce-options {
control-signal (assert | de-assert | normal);
cts (ignore | normal | require);
dcd (ignore | normal | require);
dsr (ignore | normal | require);
dtr signal-handling-option;
ignore-all;
indication (ignore | normal | require);
rts (assert | de-assert | normal);
tm (ignore | normal | require);
}
dte-options {
control-signal (assert | de-assert | normal);
cts (ignore | normal | require);
dcd (ignore | normal | require);
dsr (ignore | normal | require);
dtr signal-handling-option;
ignore-all;
indication (ignore | normal | require);
rts (assert | de-assert | normal);
tm (ignore | normal | require);
}
}
services-options {
inactivity-timeout seconds;
open-timeout seconds;
syslog {
host hostname {
facility-override facility-name;
log-prefix prefix-number;
services priority-level;
}
}
}
shared-uplink;
shared-scheduler;
shdsl-options {
annex (annex-a | annex-b);
line-rate line-rate;
loopback (local | remote);
snr-margin {
current margin;
snext margin;
}
}
sonet-options {
aggregate asx;
aps {
advertise-interval milliseconds;
authentication-key key;
force;
hold-time milliseconds;
lockout;
neighbor address;
paired-group group-name;
preserve-interfaces;
protect-circuit group-name;
request;
revert-time seconds;
switching-mode (bidirectional | unidirectional);
working-circuit group-name;
}
bytes {
c2 value;
e1-quiet value;
f1 value;
f2 value;
s1 value;
z3 value;
z4 value;
}
fcs (32 | 16);
loopback (local | remote);
mpls {
pop-all-labels {
required-depth number;
}
}
path-trace trace-string;
(payload-scrambler | no-payload-scrambler);
rfc-2615;
trigger {
defect ignore;
hold-time up milliseconds down milliseconds;
}
}
speed (10m | 100m | 1g | oc3 | oc12 | oc48);
stacked-vlan-tagging;
switch-options {
switch-port port-number {
(auto-negotiation | no-auto-negotiation);
speed (10m | 100m | 1g);
link-mode (full-duplex | half-duplex);
}
}
t1-options {
bert-algorithm algorithm;
bert-error-rate rate;
bert-period seconds;
buildout value;
byte-encoding (nx56 | nx64);
crc-major-alarm-threshold (1e-3 | 5e-4 | 1e-4 | 5e-5 | 1e-5);
crc-minor-alarm-threshold (1e-3 | 5e-4 | 1e-4 | 5e-5 | 1e-5 | 5e-6 | 1e-6);
fcs (16 | 32);
framing (esf | sf);
idle-cycle-flags (flags | ones);
invert-data;
line-encoding (ami | b8zs);
loopback (local | payload | remote);
remote-loopback-respond;
start-end-flag (filler | shared);
timeslots slot-number;
}
t3-options {
atm-encapsulation (direct | plcp);
bert-algorithm algorithm;
bert-error-rate rate;
bert-period seconds;
buildout feet;
(cbit-parity | no-cbit-parity);
compatibility-mode (adtran | digital-link | kentrox | larscom | verilink) <subrate value>;
fcs (16 | 32);
(feac-loop-respond | no-feac-loop-respond);
idle-cycle-flag value;
(long-buildout | no-long-buildout);
(loop-timing | no-loop-timing);
loopback (local | payload | remote);
(mac | no-mac);
(payload-scrambler | no-payload-scrambler);
start-end-flag value;
}
traceoptions {
flag flag;
}
transmit-bucket {
overflow (tag | discard);
rate percentage;
threshold bytes;
}
(traps | no-traps);
unidirectional;
unit logical-unit-number {
... unit-configuration ...
}
vlan-tagging;
vlan-vci-tagging;
vtmapping (itu-t | klm);
(z0-increment | no-z0-increment);
unit logical-unit-number {
disable;
accept-source-mac {
mac-address mac-address;
policer {
input policer-name;
output policer-name;
}
}
accounting-profile profile-name;
allow-any-vci;
atm-scheduler-map (default | map-name);
backup-options {
interface interface-name;
}
bandwidth rate;
cell-bundle-size cells;
clear-dont-fragment-bit;
compression {
rtp {
f-max-period number;
port {
maximum port-number;
minimum port-number;
}
queues [ queue-numbers ];
}
}
compression-device interface-name;
copy-tos-to-outer-ip-header;
demux-destination family;
demux-source family;
demux-options {
underlying-interface interface-name;
}
description text;
dial-options {
l2tp-interface-id name;
ipsec-interface-id name;
(dedicated | shared);
}
dialer-options {
activation-delay seconds;
callback;
callback-wait-period time;
deactivation-delay seconds;
dial-string [ dial-string-numbers ];
idle-timeout seconds;
incoming-map {
(accept-all | caller caller-number);
}
initial-route-check seconds;
load-interval seconds;
load-threshold number;
pool pool;
redial-delay time;
watch-list {
routes;
}
}
disable-mlppp-inner-ppp-pfc;
dlci dlci-identifier;
drop-timeout milliseconds;
dynamic-call-admission-control {
activation-priority number;
bearer-bandwidth-limit threshold;
}
encapsulation type;
epd-threshold cells plp1 cells;
family family-name {
... family-configuration ...
}
filter filter-name;
fragment-threshold bytes;
inner-vlan-id-range start start-id end end-id;
input-vlan-map {
(pop | pop-pop | pop-swap | push | push-push | swap | swap-push | swap-swap);
inner-tag-protocol-id tpid;
inner-vlan-id number;
tag-protocol-id tpid;
vlan-id number;
}
interleave-fragments;
inverse-arp;
(keepalives | no-keepalives);
layer2-policer {
input-policer policer-name;
input-three-color policer-name;
output-policer policer-name;
output-three-color policer-name;
}
link-layer-overhead percent;
minimum-links number;
mrru bytes;
multicast-dlci dlci-identifier;
multicast-vci vpi-identifier.vci-identifier;
multipoint;
oam-liveness {
up-count cells;
down-count cells;
}
oam-period (disable | seconds);
output-vlan-map {
(pop | pop-pop | pop-swap | push | push-push | swap | swap-push | swap-swap);
inner-tag-protocol-id tpid;
inner-vlan-id number;
tag-protocol-id tpid;
vlan-id number;
}
passive-monitor-mode;
peer-unit unit-number;
plp-to-clp;
point-to-point;
ppp-options {
chap {
access-profile profile-name;
default-chap-secret secret;
local-name name;
passive;
}
compression {
acfc;
pfc;
}
lcp-restart-timer milliseconds;
loopback-clear-timer seconds;
ncp-restart-timer milliseconds;
pap {
access-profile profile-name;
default-pap-password password;
local-name name;
local-password password;
passive;
}
}
pppoe-options {
access-concentrator name;
auto-reconnect seconds;
(client | server);
service-name name;
underlying-interface interface-name;
}
proxy-arp;
reassemble-packets;
rpm client;
service-domain (inside | outside);
shaping {
(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);
queue-length number;
}
short-sequence;
transmit-weight number;
(traps | no-traps);
trunk-bandwidth rate;
trunk-id number;
tunnel {
allow-fragmentation;
backup-destination address;
destination destination-address;
do-not-fragment;
key number;
routing-instance {
destination routing-instance-name;
}
source source-address;
ttl number;
}
uplink-shared-with psdn;
vci vpi-identifier.vci-identifier;
vci-range start start-vci end end-vci;
vpi vpi-identifier;
vlan-id number;
vlan-id-range number-number;
vlan-tags inner tpid.vlan-id outer tpid.vlan-id;
family family-name {
accounting {
destination-class-usage;
source-class-usage {
(input | output | input output);
}
}
address address {
... address-configuration ...
}
bundle interface-name;
dhcp {
client-identifier (ascii text | hexadecimal hexadecimal-value);
lease-time seconds;
retransmission-attempt number;
retransmission-interval seconds;
server-address address;
update-server;
vendor-id identifier;
}
filter {
dialer filter-name;
group filter-group-number;
(input filter-name | input-list [ filter-names ]);
(output filter-name | output-list [ filter-names ]);
}
ipsec-sa sa-name;
interface-mode (access | trunk);
keep-address-and-control;
mac-validate (loose | strict);
mtu bytes;
multicast-only;
negotiate-address;
next-hop-tunnel gateway-address ipsec-vpn vpn-name;
no-redirects;
policer {
arp policer-template-name;
input policer-template-name;
output policer-template-name;
}
primary;
protocols [ inet iso mpls ];
proxy inet-address address;
receive-options-packets;
receive-ttl-exceeded;
remote (inet-address address | mac-address address);
rpf-check <fail-filter filter-name> {
mode loose;
}
sampling {
(input | output | input output);
}
service {
input {
post-service-filter filter-name;
service-set service-set-name <service-filter filter-name>;
}
output {
service-set service-set-name <service-filter filter-name>;
}
}
simple-filter {
input filter-name;
}
(translate-discard-eligible | no-translate-discard-eligible);
(translate-fecn-and-becn | no-translate-fecn-and-becn);
unnumbered-address interface-name <destination address destination-profile profile-name | preferred-source-address address>
vlan-id number;
vlan-id-list [ number number–number ];
address address {
arp ip-address (mac | multicast-mac) mac-address <publish>;
broadcast address;
destination destination-address;
destination-profile name;
eui-64;
multipoint-destination destination-address (dlci dlci-identifier | vci vci-identifier);
multipoint-destination destination-address {
epd-threshold cells plp1 cells;
inverse-arp;
oam-liveness {
down-count cells;
up-count cells;
}
oam-period (disable | seconds);
shaping {
(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);
queue-length number;
}
transmit-weight number;
vci vpi-identifier.vci-identifier;
}
preferred;
primary;
vrrp-group group-number {
(accept-data | no-accept-data);
advertise-interval seconds;
authentication-key key;
authentication-type authentication;
fast-interval-statement milliseconds;
(preempt <hold-time seconds> | no-preempt) {
priority number;
track {
interface interface-name {
bandwidth-threshold bits-per-second priority-cost priority;
priority-cost priority;
}
priority-hold-time seconds;
route prefix routing-instance instance-name priority-cost priority;
}
virtual-address [ addresses ];
}
vrrp-inet6-group group-number {
(accept-data | no-accept-data);
fast-interval milliseconds;
inet6-advertise-interval seconds;
(preempt <hold-time seconds> | no-preempt) {
priority number;
track {
interface interface-name {
bandwidth-threshold bits-per-second priority-cost priority;
priority-cost priority;
}
priority-hold-time seconds;
route prefix routing-instance instance-name priority-cost priority;
}
virtual-inet6-address [ addresses ];
virtual-link-local-address ipv6-address
}
web-authentication http;
}
}
}
}
interface-set interface-set-name {
interface ethernet-interface-name {
(unit unit-number | vlan-tags-outer vlan-tag);
}
}
traceoptions {
file <filename> <files number> <match regular-expression> <size maximum-file-size> <world-readable | no-world-readable>;
flag flag <disable>;
no-remote-trace;
}
}
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.