[Contents] [Prev] [Next] [Index] [Report an Error]

Verifying the Layer 2 Circuit Policy Configuration

To verify that you have configured a policy for the Layer 2 circuit, issue the show route table mpls detail command. It should display the community for ingress routes that corresponds to the Layer 2 circuits, as shown by the following example:

user@host> show route table mpls detail

so-1/0/1.0 (1 entry, 1 announced)
*L2VPN  Preference: 7
Next hop: via so-1/0/0.0 weight 1, selected
Label-switched-path to-community-gold
Label operation: Push 100000 Offset: -4
Next hop: via so-1/0/0.0 weight 1
Label-switched-path to-community-silver
Label operation: Push 100000 Offset: -4
Protocol next hop: 10.255.245.45
Push 100000 Offset: -4
Indirect next hop: 85333f0 314
State: <Active Int>
Local AS:   100 
Age: 22 
Task: Common L2 VC
Announcement bits (2): 0-KRT 1-Common L2 VC 
AS path: I
Communities: 100:1

For more information on how to configure routing policies, see the JUNOS Policy Framework Configuration Guide.

[Contents] [Prev] [Next] [Index] [Report an Error]