[Contents] [Prev] [Next] [Index] [Report an Error]

traceoptions

Syntax

traceoptions {
file filename <replace> <size size> <files number> <no-stamp> (<world-readable>|<no-world-readable>);
flag flag <flag-modifier> <disable>;
}

Hierarchy Level

[edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls],
[edit routing-instances routing-instance-name protocols vpls]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Trace traffic flowing through a VPLS.

Options

disable—(Optional) Disable the tracing operation. You can use this option to disable a single operation when you have defined a broad group of tracing operations, such as all.

file filename—Name of the file to receive the output of the tracing operation. Enclose the name in quotation marks (" ").

files number—(Optional) Maximum number of trace files. When a trace file named trace-file reaches this size, it is renamed trace-file.0. When trace-file again reaches its maximum size, trace-file.0 is renamed trace-file .1 and trace-file is renamed trace-file.0. This renaming scheme continues until the maximum number of trace files is reached. Then the oldest trace file is overwritten.

If you specify a maximum number of files, you also must specify a maximum file size with the size option.

Range: 2 through 1000 files
Default: 2 files

flag flag—Tracing operation to perform. To specify more than one tracing operation, include multiple flag statements. You can specify the following tracing flags:

flag-modifier—(Optional) Modifier for the tracing flag. You can specify the following modifiers:

no-stamp—(Optional) Do not place timestamp information at the beginning of each line in the trace file.

Default: If you do not include this option, timestamp information is placed at the beginning of each line of the tracing output.

no-world-readable—Do not allow any user to read the log file.

replace—(Optional) Replace an existing trace file if there is one.

Default: If you do not include this option, tracing output is appended to an existing trace file.

size size—(Optional) Maximum size of each trace file, in kilobytes (KB), megabytes (MB), or gigabytes (GB). When a trace file named trace-file reaches this size, it is renamed trace-file.0. When trace-file again reaches its maximum size, trace-file.0 is renamed trace-file.1 and trace-file is renamed trace-file.0. This renaming scheme continues until the maximum number of trace files is reached. Then the oldest trace file is overwritten.

If you specify a maximum file size, you also must specify a maximum number of trace files with the files option.

Syntax: xk to specify kilobytes, xm to specify megabytes, or xg to specify gigabytes
Range: 10 KB through the maximum file size supported on your system
Default: 1 MB

world-readable—Allow any user to read the log file.

Usage Guidelines

See Tracing VPLS Traffic and Operations.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.