Configuring the Routing Instance with the Encapsulating Interface

If the tunnel-encapsulating interface, t3-0/1/3, is also configured under the routing instance, you need to specify the routing instance name under the interface definition. The system uses this routing instance to search for the tunnel destination address for the IPSec tunnel using manual security association.

The following sections explain how to configure the routing instance with the encapsulating interface:

• Configuring the Routing Instance on Router PE1
• Configuring the ES Tunnel Interface on Router PE1
• Configuring the Encapsulating Interface on Router PE1

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.