Configuring the Routing Instance with the Encapsulating Interface

If the tunnel-encapsulating interface, t3-0/1/3, is also configured under the routing instance, then you need to specify the name of that routing instance under the interface definition. The system uses this routing instance to search for the tunnel destination address.

To configure the routing instance with the encapsulating interface, you perform the steps in the following sections:

• Configuring the Routing Instance on Router PE1
• Configuring the GRE Tunnel Interface on Router PE1
• Configuring the Encapsulation Interface on Router PE1

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.