[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Multihoming on the PE Router

When a CE device is connected to the same VPLS site on more than one PE router, include the multi-homing statement on all associated PE routers. Configuration of this statement tracks BGP peers. If no BGP peer is available, VPLS deactivates all active interfaces for a site. To specify that the PE router is part of a multihomed VPLS site, include the multi-homing statement:




multi-homing;

You can configure this statement at the following hierarchy levels:

[edit routing-instances routing-instance-name protocols vpls site site-name]
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls site site-name]

Include the multi-homing statement on all PE routers associated with a particular VPLS site.

[Contents] [Prev] [Next] [Index] [Report an Error]