[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring LDP Signaling for the VPLS Routing Instance

To configure the VPLS routing instance to use LDP signaling, you must configure the same VPLS identifier on each PE router participating in the instance. Specify the VPLS identifier with the vpls-id statement:




vpls-id vpls-id;

You can include this statement at the following hierarchy levels:

[edit routing-instances routing-instance-name protocols vpls]
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls]

To configure the VPLS routing instance to use LDP signaling, you also must use the neighbor statement to specify each of the neighboring PE routers that are a part of this VPLS domain:




neighbor neighbor-id;

You can include this statement at the following hierarchy levels:

[edit routing-instances routing-instance-name protocols vpls]
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls]

[Contents] [Prev] [Next] [Index] [Report an Error]