[Contents] [Prev] [Next] [Index] [Report an Error]

pic

See the following topics:

pic (M-series and T-series Routing Platforms)

Syntax

pic pic-number {
ce1 {
e1 port-number {
channel-group group-number timeslots slot-number;
}
}
ct3 {
port port-number {
t1 link-number {
channel-group group-number timeslots slot-number;
}
}
}
framing (sdh | sonet);
idle-cell format {
itu-t;
payload-pattern payload-pattern-byte;
}
max-queues-per-interface (8 | 4);
no-concatenate;
}

Hierarchy Level

[edit chassis fpc slot-number]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Configure properties for an individual PIC.

Options

pic-number—Slot number in which the PIC is installed.

Range: 0 through 3

The remaining statements are explained separately in this chapter.

Usage Guidelines

See Configuring SONET/SDH Framing, Configuring Channelized PIC Operation, Configuring Channelized DS3-to-DS0 Naming, and Configuring Channelized E1 Naming.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

pic (TX Matrix Platform)

Syntax

pic pic-number {
atm-cell-relay-accumulation;
atm-l2circuit-mode (cell | aal5 | trunk trunk);
framing (sdh | sonet);
idle-cell-format {
itu-t;
payload-pattern payload-pattern-byte;
}
max-queues-per-interface (8 | 4);
no-concatenate;
q-pic-large-buffer <large-scale | small-scale>;
}

Hierarchy Level

[edit chassis lcc number fpc slot-number]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

On a TX Matrix platform, configure properties for an individual PIC.

Options

pic-number—Slot number in which the PIC is installed.

Range: 0 through 3

The remaining statements are explained separately in this chapter.

Usage Guidelines

See Configuring SONET/SDH Framing.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Related Topics

TX Matrix Platform and T640 Routing Node Configuration Guidelines.

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.