[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuring the Software from External Devices
You can configure the router from
a system console connected to the routing platform’s console
port or by using Telnet to access the router remotely. The router
provides three ports on the craft interface for connecting external
management devices to the Routing Engine and the JUNOS software:
- Console port—Connects a system console using an
RS-232 serial cable.
- Auxiliary port—Connects a laptop or modem using
an RS-232 serial cable.
- Ethernet management port—Connects the Routing Engine
to a management LAN (or any other device that plugs into an Ethernet
connection) for remote management through a PC or other client device.
The Ethernet port is 10/100 megabits per second (Mbps) autosensing
and requires an RJ-45 connector.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
