probe-type

Syntax

Hierarchy Level

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Specify the packet and protocol contents of a probe.

Options

type—Specify one of the following probe type values:

• http-get—(Not available at the [edit services rpm bgp] hierarchy level.) Sends a Hypertext Transfer Protocol (HTTP) get request to a target URL.
• http-metadata-get—(Not available at the [edit services rpm bgp] hierarchy level.) Sends an HTTP get request for metadata to a target URL.
• icmp-ping—Sends ICMP echo requests to a target address.
• icmp-ping-timestamp—Sends ICMP timestamp requests to a target address.
• tcp-ping—Sends TCP packets to a target.
• udp-ping—Sends UDP packets to a target.
• udp-ping-timestamp—Sends UDP timestamp requests to a target address.

Usage Guidelines

See Configuring BGP Neighbor Discovery Through RPM or Configuring the Probe.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.