 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
See the following sections:
- max-burst-size default bytes;
- [edit services pgcp gateway gateway-name h248-properties traffic-management]
Statement introduced in JUNOS Release 9.2.
Configure the maximum burst size for gate streams of any protocol, including RTP.
The PG uses the default value of 1000 bytes if the Policy command in H.248 messages in ON and both of the following apply:
bytes—Maximum burst size.
See Configuring Default Values for H.248 Properties.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
JUNOS Multiplay Solutions Guide
- max-burst-size {
-
- rtcp {
- fixed-value bytes;
- percentage percentage;
- }
- }
- [edit services pgcp gateway gateway-name h248-properties traffic-management]
Statement introduced in JUNOS Release 9.2.
Configure the maximum burst size for RTP/RTCP gate streams. You can configure this rate as a fixed value or as a percentage of the RTP gate's rate.
The PG uses the default value of 100 percent of the RTP gate's maximum burst size if the Policy command in H.248 messages in ON and both of the following apply:
fixed-value—Value entered is a fixed number of bytes.
bytes—Maximum burst size.
percentage—Value entered is a percentage of the RTP gate's rate.
percentage—Maximum burst size as a percentage of the RTP gate's rate.
See Configuring Default Values for H.248 Properties.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
JUNOS Multiplay Solutions Guide
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |