[Contents] [Prev] [Next] [Index] [Report an Error]

failure

See the following sections:

failure (Control Association Down)

Syntax

failure (forced-904 | forced-908 | none);

Hierarchy Level

[edit services pgcp gateway gateway-name h248-options service-change control-association-indications down]

Release Information

Statement introduced in JUNOS Release 9.3.

Description

Specify the method and reason that the VPG includes in Unregistration or Notification Messages in ServiceChange commands when a control association transitions to Out-of-Service.

Default

If you do not specify an option, the VPG includes FO/904 (forced-904).

Options

forced-904—Termination malfunctioning. The VPG is transitioning to Out-of-Service because of a failure.

forced-908—The VPG is transitioning to Out-of-Service due to administrator action or a failure.

none—The VPG does not send a ServiceChange command to the PGC.

Usage Guidelines

See Configuring ServiceChange Method and Reason.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Related Topics

JUNOS Multiplay Solutions Guide.

failure (Virtual Interface Down)

Syntax

failure (forced-904 | forced-906 | none);

Hierarchy Level

[edit services pgcp gateway gateway-name h248-options service-change virtual-interface-indications virtual-interface-down]

Release Information

Statement introduced in JUNOS Release 9.3.

Description

Specify the method and reason that the VPG includes in Service-Interruption ServiceChange commands that it sends to the PGC when a virtual interface transitions to Out-of-Service because of a failure.

Default

If you do not specify an option, the VPG includes FO/904 (forced-904).

Options

forced-904—Termination malfunctioning. The virtual interface is transitioning to Out-of-Service because of an internal failure.

forced-906—Loss of lower-layer connectivity. The virtual interface is transitioning to Out-of-Service because of a loss of layer 2 connectivity on the logical or physical interface.

none—VPG does not send a ServiceChange command.

Usage Guidelines

See Configuring ServiceChange Method and Reason.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Related Topics

JUNOS Multiplay Solutions Guide.

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.