[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Trace Operations

By default, if the traceoptions configuration is present, only important events are logged. You can configure the trace operations to be logged by including the following statements at the [edit services adaptive-services-pics traceoptions] or [edit services logging traceoptions] hierarchy level:



flag {
all;
configuration;
routing-protocol;
routing-socket;
snmp;
}

Table 18 describes the meaning of the adaptive services tracing flags.

Table 18: Adaptive Services Tracing Flags

Flag	Description	Default Setting
all	Trace all operations.	Off
command-queued	Trace command enqueue events.	Off
config	Log reading of the configuration at the [edit services] hierarchy level.	Off
handshake	Trace handshake events.	Off
init	Trace initialization events.	Off
interfaces	Trace interface events.	Off
mib	Trace GGSN SNMP MIB events.	Off
removed-client	Trace client cleanup events.	Off
show	Trace CLI command servicing.	Off

To display the end of the log, issue the show log serviced | last operational mode command:



[edit]
user@host# run show log serviced | last

[Contents] [Prev] [Next] [Index] [Report an Error]