 |
Note: The lt interface on the J-series Services Router does not support logical systems. |
On J-series Services Routers, you can configure the lt interface to provide class-of-service (CoS) support for data link switching (DLSw) traffic and real-time performance monitoring (RPM) probe packets.
Within a J-series Services Router, packets are routed to this internal interface for services. The lt interface is an internal interface only and is not associated with a physical medium or PIM. You must configure the interface for it to perform CoS for DLSW and RPM services. For more information, see the J-series Services Router Advanced WAN Access Configuration Guide.
|
Note: The lt interface on the J-series Services Router does not support logical systems. |
 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |