Configuring Link Services Physical Interface Properties

You configure link services interface properties at the logical unit and physical interface level. Default settings for link services physical interface properties are described in the section Default Settings for Link Services Interfaces.

You can configure the following link services physical interface properties:

• Default Settings for Link Services Interfaces
• Configuring the Link Services Physical Interface Encapsulation
• Configuring Link Services Acknowledgment Timers
• Configuring the Link Services Differential Delay
• Configuring Link Services Keepalive Settings on Frame Relay LMI

For descriptions of link services physical interface properties that also can be configured at the logical unit level, see Configuring Multilink and Link Services Logical Interface Properties.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.