[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Class-of-Service Actions

To configure CoS actions, include the then statement at the [edit services cos rule rule-name term term-name] hierarchy level:




then {

application-profile profile-name;

dscp (alias | bits);

forwarding-class class-name;

syslog;



(reflexive | reverse) {

application-profile profile-name;

dscp (alias | bits);

forwarding-class class-name;

syslog;
}


}

The principal CoS actions are as follows:

dscp—Causes the packet to be marked with the specified DiffServ code point (DSCP) value or alias.
forwarding-class—Causes the packet to be assigned to the specified forwarding class.

For detailed information about DSCP values and forwarding classes, see CoS Hierarchy Configuration Examples or the JUNOS Class of Service Configuration Guide.

You can optionally set the configuration to record information in the system logging facility by including the syslog statement at the [edit services cos rule rule-name term term-name then] hierarchy level. This statement overrides any syslog setting included in the service set or interface default configuration.

For information about some additional CoS actions, see the following sections:

[Contents] [Prev] [Next] [Index] [Report an Error]