- transit-delay seconds;
- [edit logical-systems logical-system-name protocols ospf area area-id peer-interface interface-name],
- [edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface interface-name],
- [edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id virtual-link],
- [edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast
| ipv4-multicast | ipv6-multicast) area area-id interface interface-name],
- [edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf area area-id interface interface-name],
- [edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf area area-id virtual-link],
- [edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast
| ipv6-multicast) area area-id interface interface-name],
- [edit protocols ospf area area-id peer-interface interface-name],
- [edit protocols (ospf | ospf3) area area-id interface interface-name],
- [edit protocols (ospf | ospf3) area area-id virtual-link],
- [edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)] area area-id interface interface-name],
- [edit routing-instances routing-instance-name protocols ospf area area-id interface interface-name],
- [edit routing-instances routing-instance-name protocols ospf area area-id virtual-link],
- [edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast
| ipv4-multicast | ipv6-multicast) area area-id interface interface-name]
Statement introduced before JUNOS Release 7.4.
Support for the realm statement introduced in JUNOS Release 9.2.
Set the estimated time required to transmit a link-state update on the interface. When calculating this time, make sure to account for transmission and propagation delays.
You should never have to modify the transit delay time.
seconds—Estimated time, in seconds.
See Specifying the Transit Delay.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.